From fb1611c0ca99d9e609057c46507be2af8389bb7b Mon Sep 17 00:00:00 2001 From: Anson Bridges Date: Tue, 17 Feb 2026 11:37:50 -0800 Subject: firmware coad --- firmware/memory_chip_gone/Core/Inc/app_common.h | 113 +++ firmware/memory_chip_gone/Core/Inc/app_conf.h | 755 +++++++++++++++++++++ firmware/memory_chip_gone/Core/Inc/app_debug.h | 67 ++ firmware/memory_chip_gone/Core/Inc/app_entry.h | 71 ++ firmware/memory_chip_gone/Core/Inc/hw_conf.h | 168 +++++ firmware/memory_chip_gone/Core/Inc/hw_if.h | 247 +++++++ firmware/memory_chip_gone/Core/Inc/main.h | 72 ++ firmware/memory_chip_gone/Core/Inc/stm32_lpm_if.h | 80 +++ .../memory_chip_gone/Core/Inc/stm32wbxx_hal_conf.h | 352 ++++++++++ firmware/memory_chip_gone/Core/Inc/stm32wbxx_it.h | 69 ++ .../memory_chip_gone/Core/Inc/utilities_conf.h | 65 ++ 11 files changed, 2059 insertions(+) create mode 100644 firmware/memory_chip_gone/Core/Inc/app_common.h create mode 100644 firmware/memory_chip_gone/Core/Inc/app_conf.h create mode 100644 firmware/memory_chip_gone/Core/Inc/app_debug.h create mode 100644 firmware/memory_chip_gone/Core/Inc/app_entry.h create mode 100644 firmware/memory_chip_gone/Core/Inc/hw_conf.h create mode 100644 firmware/memory_chip_gone/Core/Inc/hw_if.h create mode 100644 firmware/memory_chip_gone/Core/Inc/main.h create mode 100644 firmware/memory_chip_gone/Core/Inc/stm32_lpm_if.h create mode 100644 firmware/memory_chip_gone/Core/Inc/stm32wbxx_hal_conf.h create mode 100644 firmware/memory_chip_gone/Core/Inc/stm32wbxx_it.h create mode 100644 firmware/memory_chip_gone/Core/Inc/utilities_conf.h (limited to 'firmware/memory_chip_gone/Core/Inc') diff --git a/firmware/memory_chip_gone/Core/Inc/app_common.h b/firmware/memory_chip_gone/Core/Inc/app_common.h new file mode 100644 index 0000000..7da8bac --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/app_common.h @@ -0,0 +1,113 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file app_common.h + * @author MCD Application Team + * @brief App Common application configuration file for STM32WPAN Middleware. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef APP_COMMON_H +#define APP_COMMON_H + +#ifdef __cplusplus +extern "C"{ +#endif + +#include +#include +#include +#include +#include + +#include "app_conf.h" + +/* -------------------------------- * + * Basic definitions * + * -------------------------------- */ +#undef NULL +#define NULL 0 + +#undef FALSE +#define FALSE 0 + +#undef TRUE +#define TRUE (!0) + +/* -------------------------------- * + * Critical Section definition * + * -------------------------------- */ +#define BACKUP_PRIMASK() uint32_t primask_bit= __get_PRIMASK() +#define DISABLE_IRQ() __disable_irq() +#define RESTORE_PRIMASK() __set_PRIMASK(primask_bit) + +/* -------------------------------- * + * Macro delimiters * + * -------------------------------- */ +#define M_BEGIN do { + +#define M_END } while(0) + +/* -------------------------------- * + * Some useful macro definitions * + * -------------------------------- */ +#ifndef MAX +#define MAX( x, y ) (((x)>(y))?(x):(y)) +#endif + +#ifndef MIN +#define MIN( x, y ) (((x)<(y))?(x):(y)) +#endif + +#define MODINC( a, m ) M_BEGIN (a)++; if ((a)>=(m)) (a)=0; M_END + +#define MODDEC( a, m ) M_BEGIN if ((a)==0) (a)=(m); (a)--; M_END + +#define MODADD( a, b, m ) M_BEGIN (a)+=(b); if ((a)>=(m)) (a)-=(m); M_END + +#define MODSUB( a, b, m ) MODADD( a, (m)-(b), m ) + +#define PAUSE( t ) M_BEGIN \ + __IO int _i; \ + for ( _i = t; _i > 0; _i -- ); \ + M_END + +#define DIVF( x, y ) ((x)/(y)) + +#define DIVC( x, y ) (((x)+(y)-1)/(y)) + +#define DIVR( x, y ) (((x)+((y)/2))/(y)) + +#define SHRR( x, n ) ((((x)>>((n)-1))+1)>>1) + +#define BITN( w, n ) (((w)[(n)/32] >> ((n)%32)) & 1) + +#define BITNSET( w, n, b ) M_BEGIN (w)[(n)/32] |= ((U32)(b))<<((n)%32); M_END + +/* -------------------------------- * + * Compiler * + * -------------------------------- */ +#define PLACE_IN_SECTION( __x__ ) __attribute__((section (__x__))) + +#ifdef WIN32 +#define ALIGN(n) +#else +#define ALIGN(n) __attribute__((aligned(n))) +#endif + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /*APP_COMMON_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/app_conf.h b/firmware/memory_chip_gone/Core/Inc/app_conf.h new file mode 100644 index 0000000..9833c18 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/app_conf.h @@ -0,0 +1,755 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file app_conf.h + * @author MCD Application Team + * @brief Application configuration file for STM32WPAN Middleware. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef APP_CONF_H +#define APP_CONF_H + +#include "hw.h" +#include "hw_conf.h" +#include "hw_if.h" +#include "ble_bufsize.h" + +/****************************************************************************** + * Application Config + ******************************************************************************/ +/**< generic parameters ******************************************************/ + +/** + * Define Tx Power + */ +#define CFG_TX_POWER (0x18) /* -0.15dBm */ + +/** + * Define Advertising parameters + */ +#define CFG_ADV_BD_ADDRESS (0x11aabbccddee) + +/** + * Define BD_ADDR type: define proper address. Can only be GAP_PUBLIC_ADDR (0x00) or GAP_STATIC_RANDOM_ADDR (0x01) + */ +#define CFG_IDENTITY_ADDRESS GAP_PUBLIC_ADDR +/** + * Define privacy: PRIVACY_DISABLED or PRIVACY_ENABLED + */ +#define CFG_PRIVACY PRIVACY_DISABLED + +/** + * Define BLE Address Type + * Bluetooth address types defined in ble_legacy.h + * if CFG_PRIVACY equals PRIVACY_DISABLED, CFG_BLE_ADDRESS_TYPE has 2 allowed values: GAP_PUBLIC_ADDR or GAP_STATIC_RANDOM_ADDR + * if CFG_PRIVACY equals PRIVACY_ENABLED, CFG_BLE_ADDRESS_TYPE has 2 allowed values: GAP_RESOLVABLE_PRIVATE_ADDR or GAP_NON_RESOLVABLE_PRIVATE_ADDR + */ +#define CFG_BLE_ADDRESS_TYPE GAP_PUBLIC_ADDR + +#define CFG_FAST_CONN_ADV_INTERVAL_MIN (0x80) /**< 80ms */ +#define CFG_FAST_CONN_ADV_INTERVAL_MAX (0xA0) /**< 100ms */ +#define CFG_LP_CONN_ADV_INTERVAL_MIN (0x640) /**< 1s */ +#define CFG_LP_CONN_ADV_INTERVAL_MAX (0xFA0) /**< 2.5s */ +/** + * Define IO Authentication + */ +#define CFG_BONDING_MODE (1) +#define CFG_FIXED_PIN (111111) +#define CFG_USED_FIXED_PIN (0) +#define CFG_ENCRYPTION_KEY_SIZE_MAX (16) +#define CFG_ENCRYPTION_KEY_SIZE_MIN (8) + +/** + * Define IO capabilities + */ +#define CFG_IO_CAPABILITY_DISPLAY_ONLY (0x00) +#define CFG_IO_CAPABILITY_DISPLAY_YES_NO (0x01) +#define CFG_IO_CAPABILITY_KEYBOARD_ONLY (0x02) +#define CFG_IO_CAPABILITY_NO_INPUT_NO_OUTPUT (0x03) +#define CFG_IO_CAPABILITY_KEYBOARD_DISPLAY (0x04) + +#define CFG_IO_CAPABILITY CFG_IO_CAPABILITY_DISPLAY_YES_NO + +/** + * Define MITM modes + */ +#define CFG_MITM_PROTECTION_NOT_REQUIRED (0x00) +#define CFG_MITM_PROTECTION_REQUIRED (0x01) + +#define CFG_MITM_PROTECTION CFG_MITM_PROTECTION_REQUIRED + +/** + * Define Secure Connections Support + */ +#define CFG_SECURE_NOT_SUPPORTED (0x00) +#define CFG_SECURE_OPTIONAL (0x01) +#define CFG_SECURE_MANDATORY (0x02) + +#define CFG_SC_SUPPORT CFG_SECURE_OPTIONAL + +/** + * Define Keypress Notification Support + */ +#define CFG_KEYPRESS_NOT_SUPPORTED (0x00) +#define CFG_KEYPRESS_SUPPORTED (0x01) + +#define CFG_KEYPRESS_NOTIFICATION_SUPPORT CFG_KEYPRESS_NOT_SUPPORTED + +/** + * Numeric Comparison Answers + */ +#define YES (0x01) +#define NO (0x00) + +/** + * Device name configuration for Generic Access Service + */ +#define CFG_GAP_DEVICE_NAME "TEMPLATE" +#define CFG_GAP_DEVICE_NAME_LENGTH (8) + +/** + * Define PHY + */ +#define ALL_PHYS_PREFERENCE 0x00 +#define RX_2M_PREFERRED 0x02 +#define TX_2M_PREFERRED 0x02 +#define TX_1M 0x01 +#define TX_2M 0x02 +#define RX_1M 0x01 +#define RX_2M 0x02 + +/** +* Identity root key used to derive IRK and DHK(Legacy) +*/ +#define CFG_BLE_IR {0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC, 0xDE, 0xF0, 0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC, 0xDE, 0xF0} + +/** +* Encryption root key used to derive LTK(Legacy) and CSRK +*/ +#define CFG_BLE_ER {0xFE, 0xDC, 0xBA, 0x09, 0x87, 0x65, 0x43, 0x21, 0xFE, 0xDC, 0xBA, 0x09, 0x87, 0x65, 0x43, 0x21} + +/** + * SMPS supply + * SMPS not used when Set to 0 + * SMPS used when Set to 1 + */ +#define CFG_USE_SMPS 0 + +/* USER CODE BEGIN Generic_Parameters */ + +/* USER CODE END Generic_Parameters */ + +/**< specific parameters */ +/*****************************************************/ + +#define P2P_SERVER1 1 /*1 = Device is Peripherique*/ +#define P2P_SERVER2 0 +#define P2P_SERVER3 0 +#define P2P_SERVER4 0 +#define P2P_SERVER5 0 +#define P2P_SERVER6 0 + +#define CFG_DEV_ID_P2P_SERVER1 (0x83) +#define CFG_DEV_ID_P2P_SERVER2 (0x84) +#define CFG_DEV_ID_P2P_SERVER3 (0x87) +#define CFG_DEV_ID_P2P_SERVER4 (0x88) +#define CFG_DEV_ID_P2P_SERVER5 (0x89) +#define CFG_DEV_ID_P2P_SERVER6 (0x8A) +#define CFG_DEV_ID_P2P_ROUTER (0x85) + +#define RADIO_ACTIVITY_EVENT 1 /* 1 for OOB Demo */ + +/** +* AD Element - Group B Feature +*/ +/* LSB - First Byte */ +#define CFG_FEATURE_THREAD_SWITCH (0x40) + +/* LSB - Second Byte */ +#define CFG_FEATURE_OTA_REBOOT (0x20) + +#define CONN_L(x) ((int)((x)/0.625f)) +#define CONN_P(x) ((int)((x)/1.25f)) + + /* L2CAP Connection Update request parameters used for test only with smart Phone */ +#define L2CAP_REQUEST_NEW_CONN_PARAM 0 + +#define L2CAP_INTERVAL_MIN CONN_P(1000) /* 1s */ +#define L2CAP_INTERVAL_MAX CONN_P(1000) /* 1s */ +#define L2CAP_PERIPHERAL_LATENCY 0x0000 +#define L2CAP_TIMEOUT_MULTIPLIER 0x1F4 + +/* USER CODE BEGIN Specific_Parameters */ + +/* USER CODE END Specific_Parameters */ + +/****************************************************************************** + * BLE Stack + ******************************************************************************/ +/** + * Maximum number of simultaneous connections that the device will support. + * Valid values are from 1 to 8 + */ +#define CFG_BLE_NUM_LINK 2 + +/** + * Maximum number of Services that can be stored in the GATT database. + * Note that the GAP and GATT services are automatically added so this parameter should be 2 plus the number of user services + */ +#define CFG_BLE_NUM_GATT_SERVICES 8 + +/** + * Maximum number of Attributes + * (i.e. the number of characteristic + the number of characteristic values + the number of descriptors, excluding the services) + * that can be stored in the GATT database. + * Note that certain characteristics and relative descriptors are added automatically during device initialization + * so this parameters should be 9 plus the number of user Attributes + */ +#define CFG_BLE_NUM_GATT_ATTRIBUTES 68 + +/** + * Maximum supported ATT_MTU size + * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set + */ +#define CFG_BLE_MAX_ATT_MTU (156) + +/** + * Size of the storage area for Attribute values + * This value depends on the number of attributes used by application. In particular the sum of the following quantities (in octets) should be made for each attribute: + * - attribute value length + * - 5, if UUID is 16 bit; 19, if UUID is 128 bit + * - 2, if server configuration descriptor is used + * - 2*DTM_NUM_LINK, if client configuration descriptor is used + * - 2, if extended properties is used + * The total amount of memory needed is the sum of the above quantities for each attribute. + * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set + */ +#define CFG_BLE_ATT_VALUE_ARRAY_SIZE (1344) + +/** + * Prepare Write List size in terms of number of packet + * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set + */ +#define CFG_BLE_PREPARE_WRITE_LIST_SIZE BLE_PREP_WRITE_X_ATT(CFG_BLE_MAX_ATT_MTU) + +/** + * Number of allocated memory blocks + * This parameter is overwritten by the CPU2 with an hardcoded optimal value when the parameter CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set + */ +#define CFG_BLE_MBLOCK_COUNT (BLE_MBLOCKS_CALC(CFG_BLE_PREPARE_WRITE_LIST_SIZE, CFG_BLE_MAX_ATT_MTU, CFG_BLE_NUM_LINK)) + +/** + * Enable or disable the Extended Packet length feature. Valid values are 0 or 1. + */ +#define CFG_BLE_DATA_LENGTH_EXTENSION 1 + +/** + * Sleep clock accuracy in Peripheral mode (ppm value) + */ +#define CFG_BLE_PERIPHERAL_SCA 500 + +/** + * Sleep clock accuracy in Central mode + * 0 : 251 ppm to 500 ppm + * 1 : 151 ppm to 250 ppm + * 2 : 101 ppm to 150 ppm + * 3 : 76 ppm to 100 ppm + * 4 : 51 ppm to 75 ppm + * 5 : 31 ppm to 50 ppm + * 6 : 21 ppm to 30 ppm + * 7 : 0 ppm to 20 ppm + */ +#define CFG_BLE_CENTRAL_SCA 0 + +/** + * LsSource + * Some information for Low speed clock mapped in bits field + * - bit 0: 1: Calibration for the RF system wakeup clock source 0: No calibration for the RF system wakeup clock source + * - bit 1: 1: STM32WB5M Module device 0: Other devices as STM32WBxx SOC, STM32WB1M module + * - bit 2: 1: HSE/1024 Clock config 0: LSE Clock config + */ +#if defined(STM32WB5Mxx) + #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_HSE_1024) +#else + #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_HSE_1024) +#endif + +/** + * Start up time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 us (~2.44 us) + */ +#define CFG_BLE_HSE_STARTUP_TIME 0x148 + +/** + * Maximum duration of the connection event when the device is in Peripheral mode in units of 625/256 us (~2.44 us) + */ +#define CFG_BLE_MAX_CONN_EVENT_LENGTH (0xFFFFFFFF) + +/** + * Viterbi Mode + * 1 : enabled + * 0 : disabled + */ +#define CFG_BLE_VITERBI_MODE 1 + +/** + * BLE stack Options flags to be configured with: + * - SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY + * - SHCI_C2_BLE_INIT_OPTIONS_LL_HOST + * - SHCI_C2_BLE_INIT_OPTIONS_NO_SVC_CHANGE_DESC + * - SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC + * - SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RO + * - SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW + * - SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV + * - SHCI_C2_BLE_INIT_OPTIONS_NO_EXT_ADV + * - SHCI_C2_BLE_INIT_OPTIONS_CS_ALGO2 + * - SHCI_C2_BLE_INIT_OPTIONS_NO_CS_ALGO2 + * - SHCI_C2_BLE_INIT_OPTIONS_REDUC_GATTDB_NVM + * - SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM + * - SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_USED + * - SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED + * - SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_1 + * - SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3 + * which are used to set following configuration bits: + * (bit 0): 1: LL only + * 0: LL + host + * (bit 1): 1: no service change desc. + * 0: with service change desc. + * (bit 2): 1: device name Read-Only + * 0: device name R/W + * (bit 3): 1: extended advertizing supported + * 0: extended advertizing not supported + * (bit 4): 1: CS Algo #2 supported + * 0: CS Algo #2 not supported + * (bit 5): 1: Reduced GATT database in NVM + * 0: Full GATT database in NVM + * (bit 6): 1: GATT caching is used + * 0: GATT caching is not used + * (bit 7): 1: LE Power Class 1 + * 0: LE Power Class 2-3 + * other bits: complete with Options_extension flag + */ +#define CFG_BLE_OPTIONS (SHCI_C2_BLE_INIT_OPTIONS_LL_HOST | SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC | SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW | SHCI_C2_BLE_INIT_OPTIONS_NO_EXT_ADV | SHCI_C2_BLE_INIT_OPTIONS_NO_CS_ALGO2 | SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM | SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED | SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3) + +/** + * BLE stack Options_extension flags to be configured with: + * - SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_WRITABLE + * - SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_READONLY + * - SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_SUPPORTED + * - SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_NOTSUPPORTED + * which are used to set following configuration bits: + * (bit 0): 1: appearance Writable + * 0: appearance Read-Only + * (bit 1): 1: Enhanced ATT supported + * 0: Enhanced ATT not supported + * other bits: reserved (shall be set to 0) + */ +#define CFG_BLE_OPTIONS_EXT (SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_READONLY | SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_NOTSUPPORTED) + +#define CFG_BLE_MAX_COC_INITIATOR_NBR (32) + +#define CFG_BLE_MIN_TX_POWER (0) + +#define CFG_BLE_MAX_TX_POWER (0) + +/** + * BLE stack Maximum number of created Enhanced ATT bearers to be configured + * in addition to the number of links + * - Range: 0 .. 4 + */ +#define CFG_BLE_MAX_ADD_EATT_BEARERS (4) + +/** + * BLE Rx model configuration flags to be configured with: + * - SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_LEGACY + * - SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_BLOCKER + * which are used to set following configuration bits: + * (bit 0): 1: agc_rssi model improved vs RF blockers + * 0: Legacy agc_rssi model + * other bits: reserved (shall be set to 0) + */ + +#define CFG_BLE_RX_MODEL_CONFIG (SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_LEGACY) + +/* Maximum number of advertising sets. + * Range: 1 .. 8 with limitation: + * This parameter is linked to CFG_BLE_MAX_ADV_DATA_LEN such as both compliant with allocated Total memory computed with BLE_EXT_ADV_BUFFER_SIZE based + * on Max Extended advertising configuration supported. + * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set + */ + +#define CFG_BLE_MAX_ADV_SET_NBR (3) + + /* Maximum advertising data length (in bytes) + * Range: 31 .. 1650 with limitation: + * This parameter is linked to CFG_BLE_MAX_ADV_SET_NBR such as both compliant with allocated Total memory computed with BLE_EXT_ADV_BUFFER_SIZE based + * on Max Extended advertising configuration supported. + * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set + */ + +#define CFG_BLE_MAX_ADV_DATA_LEN (1650) + + /* RF TX Path Compensation Value (16-bit signed integer). Units: 0.1 dB. + * Range: -1280 .. 1280 + */ + +#define CFG_BLE_TX_PATH_COMPENS (0) + + /* RF RX Path Compensation Value (16-bit signed integer). Units: 0.1 dB. + * Range: -1280 .. 1280 + */ + +#define CFG_BLE_RX_PATH_COMPENS (0) + + /* BLE core version (16-bit signed integer). + * - SHCI_C2_BLE_INIT_BLE_CORE_5_2 + * - SHCI_C2_BLE_INIT_BLE_CORE_5_3 + * - SHCI_C2_BLE_INIT_BLE_CORE_5_4 + * which are used to set: 11(5.2), 12(5.3), 13(5.4). + */ + +#define CFG_BLE_CORE_VERSION (SHCI_C2_BLE_INIT_BLE_CORE_5_4) + +/****************************************************************************** + * Transport Layer + ******************************************************************************/ +/** + * Queue length of BLE Event + * This parameter defines the number of asynchronous events that can be stored in the HCI layer before + * being reported to the application. When a command is sent to the BLE core coprocessor, the HCI layer + * is waiting for the event with the Num_HCI_Command_Packets set to 1. The receive queue shall be large + * enough to store all asynchronous events received in between. + * When CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE is set to 27, this allow to store three 255 bytes long asynchronous events + * between the HCI command and its event. + * This parameter depends on the value given to CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE. When the queue size is to small, + * the system may hang if the queue is full with asynchronous events and the HCI layer is still waiting + * for a CC/CS event, In that case, the notification TL_BLE_HCI_ToNot() is called to indicate + * to the application a HCI command did not receive its command event within 30s (Default HCI Timeout). + */ +#define CFG_TLBLE_EVT_QUEUE_LENGTH 5 +/** + * This parameter should be set to fit most events received by the HCI layer. It defines the buffer size of each element + * allocated in the queue of received events and can be used to optimize the amount of RAM allocated by the Memory Manager. + * It should not exceed 255 which is the maximum HCI packet payload size (a greater value is a lost of memory as it will + * never be used) + * It shall be at least 4 to receive the command status event in one frame. + * The default value is set to 27 to allow receiving an event of MTU size in a single buffer. This value maybe reduced + * further depending on the application. + */ +#define CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE 255 /**< Set to 255 with the memory manager and the mailbox */ + +#define TL_BLE_EVENT_FRAME_SIZE ( TL_EVT_HDR_SIZE + CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE ) +/****************************************************************************** + * UART interfaces + ******************************************************************************/ + +/** + * Select UART interfaces + */ +#define CFG_DEBUG_TRACE_UART 0 +#define CFG_CONSOLE_MENU 0 +/****************************************************************************** + * USB interface + ******************************************************************************/ + +/** + * Enable/Disable USB interface + */ +#define CFG_USB_INTERFACE_ENABLE 0 + +/****************************************************************************** + * IPCC interface + ******************************************************************************/ + +/** + * The IPCC is dedicated to the communication between the CPU2 and the CPU1 + * and shall not be modified by the application + * The two following definitions shall not be modified + */ +#define HAL_IPCC_TX_IRQHandler(...) HW_IPCC_Tx_Handler( ) +#define HAL_IPCC_RX_IRQHandler(...) HW_IPCC_Rx_Handler( ) + +/****************************************************************************** + * Low Power + ******************************************************************************/ +/** + * When set to 1, the low power mode is enable + * When set to 0, the device stays in RUN mode + */ +#define CFG_LPM_SUPPORTED 0 + +/****************************************************************************** + * RTC interface + ******************************************************************************/ +#define HAL_RTCEx_WakeUpTimerIRQHandler(...) HW_TS_RTC_Wakeup_Handler( ) + +/****************************************************************************** + * Timer Server + ******************************************************************************/ +/** + * CFG_RTC_WUCKSEL_DIVIDER: This sets the RTCCLK divider to the wakeup timer. + * The lower is the value, the better is the power consumption and the accuracy of the timerserver + * The higher is the value, the finest is the granularity + * + * CFG_RTC_ASYNCH_PRESCALER: This sets the asynchronous prescaler of the RTC. It should as high as possible ( to output + * clock as low as possible) but the output clock should be equal or higher frequency compare to the clock feeding + * the wakeup timer. A lower clock speed would impact the accuracy of the timer server. + * + * CFG_RTC_SYNCH_PRESCALER: This sets the synchronous prescaler of the RTC. + * When the 1Hz calendar clock is required, it shall be sets according to other settings + * When the 1Hz calendar clock is not needed, CFG_RTC_SYNCH_PRESCALER should be set to 0x7FFF (MAX VALUE) + * + * CFG_RTCCLK_DIVIDER_CONF: + * Shall be set to either 0,2,4,8,16 + * When set to either 2,4,8,16, the 1Hhz calendar is supported + * When set to 0, the user sets its own configuration + * + * The following settings are computed with LSI as input to the RTC + */ + +#define CFG_RTCCLK_DIVIDER_CONF 0 + +#if (CFG_RTCCLK_DIVIDER_CONF == 0) +/** + * Custom configuration + * It does not support 1Hz calendar + * It divides the RTC CLK by 16 + */ + +#define CFG_RTCCLK_DIV (16) +#define CFG_RTC_WUCKSEL_DIVIDER (0) +#define CFG_RTC_ASYNCH_PRESCALER (0x0F) +#define CFG_RTC_SYNCH_PRESCALER (0x7FFF) + +#else + +#if (CFG_RTCCLK_DIVIDER_CONF == 2) +/** + * It divides the RTC CLK by 2 + */ +#define CFG_RTC_WUCKSEL_DIVIDER (3) +#endif + +#if (CFG_RTCCLK_DIVIDER_CONF == 4) +/** + * It divides the RTC CLK by 4 + */ +#define CFG_RTC_WUCKSEL_DIVIDER (2) +#endif + +#if (CFG_RTCCLK_DIVIDER_CONF == 8) +/** + * It divides the RTC CLK by 8 + */ +#define CFG_RTC_WUCKSEL_DIVIDER (1) +#endif + +#if (CFG_RTCCLK_DIVIDER_CONF == 16) +/** + * It divides the RTC CLK by 16 + */ +#define CFG_RTC_WUCKSEL_DIVIDER (0) +#endif + +#define CFG_RTCCLK_DIV CFG_RTCCLK_DIVIDER_CONF +#define CFG_RTC_ASYNCH_PRESCALER (CFG_RTCCLK_DIV - 1) +#define CFG_RTC_SYNCH_PRESCALER (DIVR( LSE_VALUE, (CFG_RTC_ASYNCH_PRESCALER+1) ) - 1 ) + +#endif + +/** tick timer values */ +#define CFG_TS_TICK_VAL DIVR( (CFG_RTCCLK_DIV * 1000000), LSE_VALUE ) +#define CFG_TS_TICK_VAL_PS DIVR( ((uint64_t)CFG_RTCCLK_DIV * 1e12), (uint64_t)LSE_VALUE ) + +typedef enum +{ + CFG_TIM_PROC_ID_ISR, + /* USER CODE BEGIN CFG_TimProcID_t */ + + /* USER CODE END CFG_TimProcID_t */ +} CFG_TimProcID_t; + +/****************************************************************************** + * Debug + ******************************************************************************/ +/** + * When set, this resets some hw resources to put the device in the same state as at power up. + * It resets only register that may prevent the FW to run properly. + * + * This shall be set to 0 in a final product + * + */ +#define CFG_HW_RESET_BY_FW 0 + +/** + * keep debugger enabled while in any low power mode when set to 1 + * should be set to 0 in production + */ +#define CFG_DEBUGGER_SUPPORTED 1 + +/** + * When set to 1, the traces are enabled in the BLE services + */ +#define CFG_DEBUG_BLE_TRACE 0 + +/** + * Enable or Disable traces in application + */ +#define CFG_DEBUG_APP_TRACE 0 + +#if (CFG_DEBUG_APP_TRACE != 0) +#define APP_DBG_MSG PRINT_MESG_DBG +#else +#define APP_DBG_MSG PRINT_NO_MESG +#endif + +#if ( (CFG_DEBUG_BLE_TRACE != 0) || (CFG_DEBUG_APP_TRACE != 0) ) +#define CFG_DEBUG_TRACE 1 +#endif + +#if (CFG_DEBUG_TRACE != 0) +#undef CFG_LPM_SUPPORTED +#undef CFG_DEBUGGER_SUPPORTED +#define CFG_LPM_SUPPORTED 0 +#define CFG_DEBUGGER_SUPPORTED 1 +#endif + +/** + * When CFG_DEBUG_TRACE_FULL is set to 1, the trace are output with the API name, the file name and the line number + * When CFG_DEBUG_TRACE_LIGHT is set to 1, only the debug message is output + * + * When both are set to 0, no trace are output + * When both are set to 1, CFG_DEBUG_TRACE_FULL is selected + */ +#define CFG_DEBUG_TRACE_LIGHT 0 +#define CFG_DEBUG_TRACE_FULL 0 + +#if (( CFG_DEBUG_TRACE != 0 ) && ( CFG_DEBUG_TRACE_LIGHT == 0 ) && (CFG_DEBUG_TRACE_FULL == 0)) +#undef CFG_DEBUG_TRACE_FULL +#undef CFG_DEBUG_TRACE_LIGHT +#define CFG_DEBUG_TRACE_FULL 0 +#define CFG_DEBUG_TRACE_LIGHT 1 +#endif + +#if ( CFG_DEBUG_TRACE == 0 ) +#undef CFG_DEBUG_TRACE_FULL +#undef CFG_DEBUG_TRACE_LIGHT +#define CFG_DEBUG_TRACE_FULL 0 +#define CFG_DEBUG_TRACE_LIGHT 0 +#endif + +/** + * When not set, the traces is looping on sending the trace over UART + */ +#define DBG_TRACE_USE_CIRCULAR_QUEUE 1 + +/** + * max buffer Size to queue data traces and max data trace allowed. + * Only Used if DBG_TRACE_USE_CIRCULAR_QUEUE is defined + */ +#define DBG_TRACE_MSG_QUEUE_SIZE 4096 +#define MAX_DBG_TRACE_MSG_SIZE 1024 + +/* USER CODE BEGIN Defines */ + +/* USER CODE END Defines */ + +/****************************************************************************** + * Scheduler + ******************************************************************************/ + +/** + * These are the lists of task id registered to the scheduler + * Each task id shall be in the range [0:31] + * This mechanism allows to implement a generic code in the API TL_BLE_HCI_StatusNot() to comply with + * the requirement that a HCI/ACI command shall never be sent if there is already one pending + */ + +/**< Add in that list all tasks that may send a ACI/HCI command */ +typedef enum +{ + CFG_TASK_ADV_CANCEL_ID, +#if (L2CAP_REQUEST_NEW_CONN_PARAM != 0 ) + CFG_TASK_CONN_UPDATE_REG_ID, +#endif + CFG_TASK_HCI_ASYNCH_EVT_ID, + /* USER CODE BEGIN CFG_Task_Id_With_HCI_Cmd_t */ + + /* USER CODE END CFG_Task_Id_With_HCI_Cmd_t */ + CFG_LAST_TASK_ID_WITH_HCICMD, /**< Shall be LAST in the list */ +} CFG_Task_Id_With_HCI_Cmd_t; + +/**< Add in that list all tasks that never send a ACI/HCI command */ +typedef enum +{ + CFG_FIRST_TASK_ID_WITH_NO_HCICMD = CFG_LAST_TASK_ID_WITH_HCICMD - 1, /**< Shall be FIRST in the list */ + CFG_TASK_SYSTEM_HCI_ASYNCH_EVT_ID, + /* USER CODE BEGIN CFG_Task_Id_With_NO_HCI_Cmd_t */ + + /* USER CODE END CFG_Task_Id_With_NO_HCI_Cmd_t */ + CFG_LAST_TASK_ID_WITH_NO_HCICMD /**< Shall be LAST in the list */ +} CFG_Task_Id_With_NO_HCI_Cmd_t; + +#define CFG_TASK_NBR CFG_LAST_TASK_ID_WITH_NO_HCICMD + +/** + * This is the list of priority required by the application + * Each Id shall be in the range 0..31 + */ +typedef enum +{ + CFG_SCH_PRIO_0, + /* USER CODE BEGIN CFG_SCH_Prio_Id_t */ + + /* USER CODE END CFG_SCH_Prio_Id_t */ + CFG_SCH_PRIO_NBR +} CFG_SCH_Prio_Id_t; + +/** + * This is a bit mapping over 32bits listing all events id supported in the application + */ +typedef enum +{ + CFG_IDLEEVT_HCI_CMD_EVT_RSP_ID, + CFG_IDLEEVT_SYSTEM_HCI_CMD_EVT_RSP_ID, + /* USER CODE BEGIN CFG_IdleEvt_Id_t */ + + /* USER CODE END CFG_IdleEvt_Id_t */ +} CFG_IdleEvt_Id_t; + +/****************************************************************************** + * LOW POWER + ******************************************************************************/ +/** + * Supported requester to the MCU Low Power Manager - can be increased up to 32 + * It list a bit mapping of all user of the Low Power Manager + */ +typedef enum +{ + CFG_LPM_APP, + CFG_LPM_APP_BLE, + /* USER CODE BEGIN CFG_LPM_Id_t */ + + /* USER CODE END CFG_LPM_Id_t */ +} CFG_LPM_Id_t; + +/****************************************************************************** + * OTP manager + ******************************************************************************/ +#define CFG_OTP_BASE_ADDRESS OTP_AREA_BASE + +#define CFG_OTP_END_ADRESS OTP_AREA_END_ADDR + +#endif /*APP_CONF_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/app_debug.h b/firmware/memory_chip_gone/Core/Inc/app_debug.h new file mode 100644 index 0000000..a1cbfd5 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/app_debug.h @@ -0,0 +1,67 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file app_debug.h + * @author MCD Application Team + * @brief Header for app_debug.c module + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef APP_DEBUG_H +#define APP_DEBUG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + + /* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported variables --------------------------------------------------------*/ +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/* Exported macros ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions ---------------------------------------------*/ + void APPD_Init( void ); + void APPD_EnableCPU2( void ); +/* USER CODE BEGIN EF */ + +/* USER CODE END EF */ + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /*APP_DEBUG_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/app_entry.h b/firmware/memory_chip_gone/Core/Inc/app_entry.h new file mode 100644 index 0000000..c92f0b1 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/app_entry.h @@ -0,0 +1,71 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file app_entry.h + * @author MCD Application Team + * @brief Interface to the application + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef APP_ENTRY_H +#define APP_ENTRY_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported variables --------------------------------------------------------*/ +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/* Exported macros ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions ---------------------------------------------*/ +void MX_APPE_Config(void); +void MX_APPE_Init(void); +void MX_APPE_Process(void); +void Init_Exti(void); +void Init_Smps(void); + +/* USER CODE BEGIN EF */ + +/* USER CODE END EF */ + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /*APP_ENTRY_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/hw_conf.h b/firmware/memory_chip_gone/Core/Inc/hw_conf.h new file mode 100644 index 0000000..7fd30cd --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/hw_conf.h @@ -0,0 +1,168 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file hw_conf.h + * @author MCD Application Team + * @brief Configuration of hardware interface + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef HW_CONF_H +#define HW_CONF_H + +/****************************************************************************** + * Semaphores + * THIS SHALL NO BE CHANGED AS THESE SEMAPHORES ARE USED AS WELL ON THE CM0+ + *****************************************************************************/ +/** +* The CPU2 may be configured to store the Thread persistent data either in internal NVM storage on CPU2 or in +* SRAM2 buffer provided by the user application. This can be configured with the system command SHCI_C2_Config() +* When the CPU2 is requested to store persistent data in SRAM2, it can write data in this buffer at any time when needed. +* In order to read consistent data with the CPU1 from the SRAM2 buffer, the flow should be: +* + CPU1 takes CFG_HW_THREAD_NVM_SRAM_SEMID semaphore +* + CPU1 reads all persistent data from SRAM2 (most of the time, the goal is to write these data into an NVM managed by CPU1) +* + CPU1 releases CFG_HW_THREAD_NVM_SRAM_SEMID semaphore +* CFG_HW_THREAD_NVM_SRAM_SEMID semaphore makes sure CPU2 does not update the persistent data in SRAM2 at the same time CPU1 is reading them. +* There is no timing constraint on how long this semaphore can be kept. +*/ +#define CFG_HW_THREAD_NVM_SRAM_SEMID 9 + +/** +* The CPU2 may be configured to store the BLE persistent data either in internal NVM storage on CPU2 or in +* SRAM2 buffer provided by the user application. This can be configured with the system command SHCI_C2_Config() +* When the CPU2 is requested to store persistent data in SRAM2, it can write data in this buffer at any time when needed. +* In order to read consistent data with the CPU1 from the SRAM2 buffer, the flow should be: +* + CPU1 takes CFG_HW_BLE_NVM_SRAM_SEMID semaphore +* + CPU1 reads all persistent data from SRAM2 (most of the time, the goal is to write these data into an NVM managed by CPU1) +* + CPU1 releases CFG_HW_BLE_NVM_SRAM_SEMID semaphore +* CFG_HW_BLE_NVM_SRAM_SEMID semaphore makes sure CPU2 does not update the persistent data in SRAM2 at the same time CPU1 is reading them. +* There is no timing constraint on how long this semaphore can be kept. +*/ +#define CFG_HW_BLE_NVM_SRAM_SEMID 8 + +/** +* Index of the semaphore used by CPU2 to prevent the CPU1 to either write or erase data in flash +* The CPU1 shall not either write or erase in flash when this semaphore is taken by the CPU2 +* When the CPU1 needs to either write or erase in flash, it shall first get the semaphore and release it just +* after writing a raw (64bits data) or erasing one sector. +* Once the Semaphore has been released, there shall be at least 1us before it can be taken again. This is required +* to give the opportunity to CPU2 to take it. +* On v1.4.0 and older CPU2 wireless firmware, this semaphore is unused and CPU2 is using PES bit. +* By default, CPU2 is using the PES bit to protect its timing. The CPU1 may request the CPU2 to use the semaphore +* instead of the PES bit by sending the system command SHCI_C2_SetFlashActivityControl() +*/ +#define CFG_HW_BLOCK_FLASH_REQ_BY_CPU2_SEMID 7 + +/** +* Index of the semaphore used by CPU1 to prevent the CPU2 to either write or erase data in flash +* In order to protect its timing, the CPU1 may get this semaphore to prevent the CPU2 to either +* write or erase in flash (as this will stall both CPUs) +* The PES bit shall not be used as this may stall the CPU2 in some cases. +*/ +#define CFG_HW_BLOCK_FLASH_REQ_BY_CPU1_SEMID 6 + +/** +* Index of the semaphore used to manage the CLK48 clock configuration +* When the USB is required, this semaphore shall be taken before configuring te CLK48 for USB +* and should be released after the application switch OFF the clock when the USB is not used anymore +* When using the RNG, it is good enough to use CFG_HW_RNG_SEMID to control CLK48. +* More details in AN5289 +*/ +#define CFG_HW_CLK48_CONFIG_SEMID 5 + +/* Index of the semaphore used to manage the entry Stop Mode procedure */ +#define CFG_HW_ENTRY_STOP_MODE_SEMID 4 + +/* Index of the semaphore used to access the RCC */ +#define CFG_HW_RCC_SEMID 3 + +/* Index of the semaphore used to access the FLASH */ +#define CFG_HW_FLASH_SEMID 2 + +/* Index of the semaphore used to access the PKA */ +#define CFG_HW_PKA_SEMID 1 + +/* Index of the semaphore used to access the RNG */ +#define CFG_HW_RNG_SEMID 0 + +/****************************************************************************** + * HW TIMER SERVER + *****************************************************************************/ +/** + * The user may define the maximum number of virtual timers supported. + * It shall not exceed 255 + */ +#define CFG_HW_TS_MAX_NBR_CONCURRENT_TIMER 6 + +/** + * The user may define the priority in the NVIC of the RTC_WKUP interrupt handler that is used to manage the + * wakeup timer. + * This setting is the preemptpriority part of the NVIC. + */ +#define CFG_HW_TS_NVIC_RTC_WAKEUP_IT_PREEMPTPRIO 3 + +/** + * The user may define the priority in the NVIC of the RTC_WKUP interrupt handler that is used to manage the + * wakeup timer. + * This setting is the subpriority part of the NVIC. It does not exist on all processors. When it is not supported + * on the CPU, the setting is ignored + */ +#define CFG_HW_TS_NVIC_RTC_WAKEUP_IT_SUBPRIO 0 + +/** + * Define a critical section in the Timer server + * The Timer server does not support the API to be nested + * The Application shall either: + * a) Ensure this will never happen + * b) Define the critical section + * The default implementations is masking all interrupts using the PRIMASK bit + * The TimerServer driver uses critical sections to avoid context corruption. This is achieved with the macro + * TIMER_ENTER_CRITICAL_SECTION and TIMER_EXIT_CRITICAL_SECTION. When CFG_HW_TS_USE_PRIMASK_AS_CRITICAL_SECTION is set + * to 1, all STM32 interrupts are masked with the PRIMASK bit of the CortexM CPU. It is possible to use the BASEPRI + * register of the CortexM CPU to keep allowed some interrupts with high priority. In that case, the user shall + * re-implement TIMER_ENTER_CRITICAL_SECTION and TIMER_EXIT_CRITICAL_SECTION and shall make sure that no TimerServer + * API are called when the TIMER critical section is entered + */ +#define CFG_HW_TS_USE_PRIMASK_AS_CRITICAL_SECTION 1 + +/** + * This value shall reflect the maximum delay there could be in the application between the time the RTC interrupt + * is generated by the Hardware and the time when the RTC interrupt handler is called. This time is measured in + * number of RTCCLK ticks. + * A relaxed timing would be 10ms + * When the value is too short, the timerserver will not be able to count properly and all timeout may be random. + * When the value is too long, the device may wake up more often than the most optimal configuration. However, the + * impact on power consumption would be marginal (unless the value selected is extremely too long). It is strongly + * recommended to select a value large enough to make sure it is not too short to ensure reliability of the system + * as this will have marginal impact on low power mode + */ +#define CFG_HW_TS_RTC_HANDLER_MAX_DELAY ( 10 * (LSI_VALUE/1000) ) + + /** + * Interrupt ID in the NVIC of the RTC Wakeup interrupt handler + * It shall be type of IRQn_Type + */ +#define CFG_HW_TS_RTC_WAKEUP_HANDLER_ID RTC_WKUP_IRQn + +/****************************************************************************** + * HW UART + *****************************************************************************/ +#define CFG_HW_LPUART1_ENABLED 0 +#define CFG_HW_LPUART1_DMA_TX_SUPPORTED 0 + +#define CFG_HW_USART1_ENABLED 0 +#define CFG_HW_USART1_DMA_TX_SUPPORTED 0 + +#endif /*HW_CONF_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/hw_if.h b/firmware/memory_chip_gone/Core/Inc/hw_if.h new file mode 100644 index 0000000..f289515 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/hw_if.h @@ -0,0 +1,247 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file hw_if.h + * @author MCD Application Team + * @brief Hardware Interface + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef HW_IF_H +#define HW_IF_H + +#ifdef __cplusplus +extern "C" { +#endif + + /* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx.h" +#include "stm32wbxx_ll_exti.h" +#include "stm32wbxx_ll_system.h" +#include "stm32wbxx_ll_rcc.h" +#include "stm32wbxx_ll_ipcc.h" +#include "stm32wbxx_ll_bus.h" +#include "stm32wbxx_ll_pwr.h" +#include "stm32wbxx_ll_cortex.h" +#include "stm32wbxx_ll_utils.h" +#include "stm32wbxx_ll_hsem.h" +#include "stm32wbxx_ll_gpio.h" +#include "stm32wbxx_ll_rtc.h" + +#ifdef USE_STM32WBXX_USB_DONGLE +#include "stm32wbxx_usb_dongle.h" +#endif +#ifdef USE_STM32WBXX_NUCLEO +#include "stm32wbxx_nucleo.h" +#endif +#ifdef USE_X_NUCLEO_EPD +#include "x_nucleo_epd.h" +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + + /****************************************************************************** + * HW UART + ******************************************************************************/ + typedef enum + { + hw_uart1, + hw_uart2, + hw_lpuart1, + } hw_uart_id_t; + + typedef enum + { + hw_uart_ok, + hw_uart_error, + hw_uart_busy, + hw_uart_to, + } hw_status_t; + + void HW_UART_Init(hw_uart_id_t hw_uart_id); + void HW_UART_Receive_IT(hw_uart_id_t hw_uart_id, uint8_t *pData, uint16_t Size, void (*Callback)(void)); + void HW_UART_Transmit_IT(hw_uart_id_t hw_uart_id, uint8_t *pData, uint16_t Size, void (*Callback)(void)); + hw_status_t HW_UART_Transmit(hw_uart_id_t hw_uart_id, uint8_t *p_data, uint16_t size, uint32_t timeout); + hw_status_t HW_UART_Transmit_DMA(hw_uart_id_t hw_uart_id, uint8_t *p_data, uint16_t size, void (*Callback)(void)); + void HW_UART_Interrupt_Handler(hw_uart_id_t hw_uart_id); + void HW_UART_DMA_Interrupt_Handler(hw_uart_id_t hw_uart_id); + + /****************************************************************************** + * HW TimerServer + ******************************************************************************/ + /* Exported types ------------------------------------------------------------*/ + /** + * This setting is used when standby mode is supported. + * hw_ts_InitMode_Limited should be used when the device restarts from Standby Mode. In that case, the Timer Server does + * not re-initialized its context. Only the Hardware register which content has been lost is reconfigured + * Otherwise, hw_ts_InitMode_Full should be requested (Start from Power ON) and everything is re-initialized. + */ + typedef enum + { + hw_ts_InitMode_Full, + hw_ts_InitMode_Limited, + } HW_TS_InitMode_t; + + /** + * When a Timer is created as a SingleShot timer, it is not automatically restarted when the timeout occurs. However, + * the timer is kept reserved in the list and could be restarted at anytime with HW_TS_Start() + * + * When a Timer is created as a Repeated timer, it is automatically restarted when the timeout occurs. + */ + typedef enum + { + hw_ts_SingleShot, + hw_ts_Repeated + } HW_TS_Mode_t; + + /** + * hw_ts_Successful is returned when a Timer has been successfully created with HW_TS_Create(). Otherwise, hw_ts_Failed + * is returned. When hw_ts_Failed is returned, that means there are not enough free slots in the list to create a + * Timer. In that case, CFG_HW_TS_MAX_NBR_CONCURRENT_TIMER should be increased + */ + typedef enum + { + hw_ts_Successful, + hw_ts_Failed, + }HW_TS_ReturnStatus_t; + + typedef void (*HW_TS_pTimerCb_t)(void); + + /** + * @brief Initialize the timer server + * This API shall be called by the application before any timer is requested to the timer server. It + * configures the RTC module to be connected to the LSI input clock. + * + * @param TimerInitMode: When the device restarts from Standby, it should request hw_ts_InitMode_Limited so that the + * Timer context is not re-initialized. Otherwise, hw_ts_InitMode_Full should be requested + * @param hrtc: RTC Handle + * @retval None + */ + void HW_TS_Init(HW_TS_InitMode_t TimerInitMode, RTC_HandleTypeDef *hrtc); + + /** + * @brief Interface to create a virtual timer + * The user shall call this API to create a timer. Once created, the timer is reserved to the module until it + * has been deleted. When creating a timer, the user shall specify the mode (single shot or repeated), the + * callback to be notified when the timer expires and a module ID to identify in the timer interrupt handler + * which module is concerned. In return, the user gets a timer ID to handle it. + * + * @param TimerProcessID: This is an identifier provided by the user and returned in the callback to allow + * identification of the requester + * @param pTimerId: Timer Id returned to the user to request operation (start, stop, delete) + * @param TimerMode: Mode of the virtual timer (Single shot or repeated) + * @param pTimerCallBack: Callback when the virtual timer expires + * @retval HW_TS_ReturnStatus_t: Return whether the creation is successful or not + */ + HW_TS_ReturnStatus_t HW_TS_Create(uint32_t TimerProcessID, uint8_t *pTimerId, HW_TS_Mode_t TimerMode, HW_TS_pTimerCb_t pTimerCallBack); + + /** + * @brief Stop a virtual timer + * This API may be used to stop a running timer. A timer which is stopped is move to the pending state. + * A pending timer may be restarted at any time with a different timeout value but the mode cannot be changed. + * Nothing is done when it is called to stop a timer which has been already stopped + * + * @param TimerID: Id of the timer to stop + * @retval None + */ + void HW_TS_Stop(uint8_t TimerID); + + /** + * @brief Start a virtual timer + * This API shall be used to start a timer. The timeout value is specified and may be different each time. + * When the timer is in the single shot mode, it will move to the pending state when it expires. The user may + * restart it at any time with a different timeout value. When the timer is in the repeated mode, it always + * stay in the running state. When the timer expires, it will be restarted with the same timeout value. + * This API shall not be called on a running timer. + * + * @param TimerID: The ID Id of the timer to start + * @param timeout_ticks: Number of ticks of the virtual timer (Maximum value is (0xFFFFFFFF-0xFFFF = 0xFFFF0000) + * @retval None + */ + void HW_TS_Start(uint8_t TimerID, uint32_t timeout_ticks); + + /** + * @brief Delete a virtual timer from the list + * This API should be used when a timer is not needed anymore by the user. A deleted timer is removed from + * the timer list managed by the timer server. It cannot be restarted again. The user has to go with the + * creation of a new timer if required and may get a different timer id + * + * @param TimerID: The ID of the timer to remove from the list + * @retval None + */ + void HW_TS_Delete(uint8_t TimerID); + + /** + * @brief Schedule the timer list on the timer interrupt handler + * This interrupt handler shall be called by the application in the RTC interrupt handler. This handler takes + * care of clearing all status flag required in the RTC and EXTI peripherals + * + * @param None + * @retval None + */ + void HW_TS_RTC_Wakeup_Handler(void); + + /** + * @brief Return the number of ticks to count before the interrupt + * This API returns the number of ticks left to be counted before an interrupt is generated by the + * Timer Server. This API may be used by the application for power management optimization. When the system + * enters low power mode, the mode selection is a tradeoff between the wakeup time where the CPU is running + * and the time while the CPU will be kept in low power mode before next wakeup. The deeper is the + * low power mode used, the longer is the wakeup time. The low power mode management considering wakeup time + * versus time in low power mode is implementation specific + * When the timer is disabled (No timer in the list), it returns 0xFFFF + * + * @param None + * @retval The number of ticks left to count + */ + uint16_t HW_TS_RTC_ReadLeftTicksToCount(void); + + /** + * @brief Notify the application that a registered timer has expired + * This API shall be implemented by the user application. + * This API notifies the application that a timer expires. This API is running in the RTC Wakeup interrupt + * context. The application may implement an Operating System to change the context priority where the timer + * callback may be handled. This API provides the module ID to identify which module is concerned and to allow + * sending the information to the correct task + * + * @param TimerProcessID: The TimerProcessId associated with the timer when it has been created + * @param TimerID: The TimerID of the expired timer + * @param pTimerCallBack: The Callback associated with the timer when it has been created + * @retval None + */ + void HW_TS_RTC_Int_AppNot(uint32_t TimerProcessID, uint8_t TimerID, HW_TS_pTimerCb_t pTimerCallBack); + + /** + * @brief Notify the application that the wakeupcounter has been updated + * This API should be implemented by the user application + * This API notifies the application that the counter has been updated. This is expected to be used along + * with the HW_TS_RTC_ReadLeftTicksToCount () API. It could be that the counter has been updated since the + * last call of HW_TS_RTC_ReadLeftTicksToCount () and before entering low power mode. This notification + * provides a way to the application to solve that race condition to reevaluate the counter value before + * entering low power mode + * + * @param None + * @retval None + */ + void HW_TS_RTC_CountUpdated_AppNot(void); + +#ifdef __cplusplus +} +#endif + +#endif /*HW_IF_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/main.h b/firmware/memory_chip_gone/Core/Inc/main.h new file mode 100644 index 0000000..5e0aecb --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/main.h @@ -0,0 +1,72 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx_hal.h" +#include "app_conf.h" +#include "app_entry.h" +#include "app_common.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/stm32_lpm_if.h b/firmware/memory_chip_gone/Core/Inc/stm32_lpm_if.h new file mode 100644 index 0000000..545f197 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/stm32_lpm_if.h @@ -0,0 +1,80 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32_lpm_if.h + * @author MCD Application Team + * @brief Header for stm32_lpm_if.c module (device specific LP management) + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_LPM_IF_H +#define STM32_LPM_IF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/** + * @brief Enters Low Power Off Mode + * @param none + * @retval none + */ +void PWR_EnterOffMode( void ); +/** + * @brief Exits Low Power Off Mode + * @param none + * @retval none + */ +void PWR_ExitOffMode( void ); + +/** + * @brief Enters Low Power Stop Mode + * @note ARM exists the function when waking up + * @param none + * @retval none + */ +void PWR_EnterStopMode( void ); +/** + * @brief Exits Low Power Stop Mode + * @note Enable the pll at 32MHz + * @param none + * @retval none + */ +void PWR_ExitStopMode( void ); + +/** + * @brief Enters Low Power Sleep Mode + * @note ARM exits the function when waking up + * @param none + * @retval none + */ +void PWR_EnterSleepMode( void ); + +/** + * @brief Exits Low Power Sleep Mode + * @note ARM exits the function when waking up + * @param none + * @retval none + */ +void PWR_ExitSleepMode( void ); + +#ifdef __cplusplus +} +#endif + +#endif /*STM32_LPM_IF_H */ + diff --git a/firmware/memory_chip_gone/Core/Inc/stm32wbxx_hal_conf.h b/firmware/memory_chip_gone/Core/Inc/stm32wbxx_hal_conf.h new file mode 100644 index 0000000..e5c5862 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/stm32wbxx_hal_conf.h @@ -0,0 +1,352 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wbxx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WBxx_HAL_CONF_H +#define __STM32WBxx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +#define HAL_HSEM_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_IPCC_MODULE_ENABLED +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +#define HAL_RTC_MODULE_ENABLED +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +/*#define HAL_UART_MODULE_ENABLED */ +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_EXTI_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_PKA_REGISTER_CALLBACKS 0u +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SAI_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_TSC_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI1) value. + */ +#if !defined (LSI1_VALUE) + #define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/ +#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief Internal Low Speed oscillator (LSI2) value. + */ +#if !defined (LSI2_VALUE) + #define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/ +#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief Internal Multiple Speed oscillator (HSI48) default value. + * This value is the default HSI48 range value after Reset. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI48_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32wbxx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32wbxx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32wbxx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32wbxx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32wbxx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32wbxx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32wbxx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32wbxx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32wbxx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32wbxx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32wbxx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IPCC_MODULE_ENABLED + #include "stm32wbxx_hal_ipcc.h" +#endif /* HAL_IPCC_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32wbxx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32wbxx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32wbxx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32wbxx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32wbxx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32wbxx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32wbxx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32wbxx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32wbxx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32wbxx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32wbxx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32wbxx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32wbxx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32wbxx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32wbxx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32wbxx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32wbxx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32wbxx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32wbxx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32wbxx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WBxx_HAL_CONF_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/stm32wbxx_it.h b/firmware/memory_chip_gone/Core/Inc/stm32wbxx_it.h new file mode 100644 index 0000000..39c7be8 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/stm32wbxx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wbxx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WBxx_IT_H +#define __STM32WBxx_IT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +void IPCC_C1_RX_IRQHandler(void); +void IPCC_C1_TX_IRQHandler(void); +void HSEM_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WBxx_IT_H */ diff --git a/firmware/memory_chip_gone/Core/Inc/utilities_conf.h b/firmware/memory_chip_gone/Core/Inc/utilities_conf.h new file mode 100644 index 0000000..45709e0 --- /dev/null +++ b/firmware/memory_chip_gone/Core/Inc/utilities_conf.h @@ -0,0 +1,65 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file utilities_conf.h + * @author MCD Application Team + * @brief Configuration file for STM32 Utilities. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ***************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef UTILITIES_CONF_H +#define UTILITIES_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "cmsis_compiler.h" +#include "string.h" +#include "app_conf.h" +/****************************************************************************** + * common + ******************************************************************************/ +#define UTILS_ENTER_CRITICAL_SECTION( ) uint32_t primask_bit = __get_PRIMASK( );\ + __disable_irq( ) + +#define UTILS_EXIT_CRITICAL_SECTION( ) __set_PRIMASK( primask_bit ) + +#define UTILS_MEMSET8( dest, value, size ) memset( dest, value, size); + +/****************************************************************************** + * tiny low power manager + * (any macro that does not need to be modified can be removed) + ******************************************************************************/ +#define UTIL_LPM_INIT_CRITICAL_SECTION( ) +#define UTIL_LPM_ENTER_CRITICAL_SECTION( ) UTILS_ENTER_CRITICAL_SECTION( ) +#define UTIL_LPM_EXIT_CRITICAL_SECTION( ) UTILS_EXIT_CRITICAL_SECTION( ) + +/****************************************************************************** + * sequencer + * (any macro that does not need to be modified can be removed) + ******************************************************************************/ +#define UTIL_SEQ_INIT_CRITICAL_SECTION( ) +#define UTIL_SEQ_ENTER_CRITICAL_SECTION( ) UTILS_ENTER_CRITICAL_SECTION( ) +#define UTIL_SEQ_EXIT_CRITICAL_SECTION( ) UTILS_EXIT_CRITICAL_SECTION( ) +#define UTIL_SEQ_CONF_TASK_NBR (32) +#define UTIL_SEQ_CONF_PRIO_NBR CFG_SCH_PRIO_NBR +#define UTIL_SEQ_MEMSET8( dest, value, size ) UTILS_MEMSET8( dest, value, size ) + +#ifdef __cplusplus +} +#endif + +#endif /*UTILITIES_CONF_H */ -- cgit v1.2.3