firmware coadHEADmaster

1 files changed, 1945 insertions, 0 deletions

diff --git a/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c b/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c
new file mode 100644
index 0000000..b5ba9b2
--- /dev/null
+++ b/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c
@@ -0,0 +1,1945 @@
+/**
+  ******************************************************************************
+  * @file    stm32wbxx_hal_rtc.c
+  * @author  MCD Application Team
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Real-Time Clock (RTC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Calendar (Time and Date) configuration functions
+  *           + Alarms (Alarm A and Alarm B) configuration functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+               ##### RTC and Backup Domain Operating Condition #####
+  ==============================================================================
+  [..] The real-time clock (RTC) and the RTC backup registers can be powered
+       from the VBAT voltage when the main VDD supply is powered off.
+       To retain the content of the RTC backup registers and supply the RTC when
+       VDD is turned off, VBAT pin can be connected to an optional standby
+       voltage supplied by a battery or by another source.
+
+  [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+       off, the VBAT pin powers the following blocks:
+    (#) The RTC
+    (#) The LSE oscillator
+    (#) PC13 to PC15 I/Os, plus PA0 and PC12 I/Os (when available)
+
+  [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+       the following pins are available:
+    (#) PC14 and PC15 can be used as either GPIO or LSE pins
+    (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+    (#) PA0 can be used as a GPIO or as the RTC_AF2 pin
+    (#) PC12 can be used as a GPIO or as the RTC_AF3 pin
+
+  [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+       because VDD is not present), the following pins are available:
+    (#) PC14 and PC15 can be used as LSE pins only
+    (#) PC13 can be used as the RTC_AF1 pin
+    (#) PA0 can be used as the RTC_AF2 pin
+    (#) PC12 can be used as the RTC_AF3 pin
+
+                   ##### Backup Domain Reset #####
+  ==================================================================
+  [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+       to their reset values.
+  [..] A backup domain reset is generated when one of the following events occurs:
+    (#) Software reset, triggered by setting the BDRST bit in the
+        RCC Backup domain control register (RCC_BDCR).
+    (#) VDD or VBAT power on, if both supplies have previously been powered off.
+    (#) Tamper detection event resets all data backup registers.
+
+                   ##### Backup Domain Access #####
+  ==================================================================
+  [..] After reset, the backup domain (RTC registers and RTC backup data registers)
+       is protected against possible unwanted write accesses.
+  [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+    (+) Enable the Power Controller (PWR) APB1 interface clock using the
+        __HAL_RCC_PWR_CLK_ENABLE() macro.
+    (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+    (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() macro.
+    (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() macro.
+
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable the RTC domain access (see description in the section above).
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+        format using the HAL_RTC_Init() function.
+
+  *** Time and Date configuration ***
+  ===================================
+  [..]
+    (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+        and HAL_RTC_SetDate() functions.
+    (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate()
+        functions.
+    (+) To manage the RTC summer or winter time change, use the following
+        functions:
+        (++) HAL_RTC_DST_Add1Hour() or HAL_RTC_DST_Sub1Hour to add or subtract
+             1 hour from the calendar time.
+        (++) HAL_RTC_DST_SetStoreOperation() or HAL_RTC_DST_ClearStoreOperation
+             to memorize whether the time change has been performed or not.
+
+  *** Alarm configuration ***
+  ===========================
+  [..]
+    (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+        You can also configure the RTC Alarm with interrupt mode using the
+        HAL_RTC_SetAlarm_IT() function.
+    (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+                  ##### RTC and low power modes #####
+  ==================================================================
+  [..] The MCU can be woken up from a low power mode by an RTC alternate
+       function.
+  [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
+       RTC wakeup, RTC tamper event detection and RTC timestamp event detection.
+       These RTC alternate functions can wake up the system from the Stop and
+       Standby low power modes.
+  [..] The system can also wake up from low power modes without depending
+       on an external interrupt (Auto-wakeup mode), by using the RTC alarm
+       or the RTC wakeup events.
+  [..] The RTC provides a programmable time base for waking up from the
+       Stop or Standby mode at regular intervals.
+       Wakeup from STOP and STANDBY modes is possible only when the RTC clock
+       source is LSE or LSI.
+
+  *** Callback registration ***
+  =============================================
+  [..]
+  When the compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or
+  not defined, the callback registration feature is not available and all
+  callbacks are set to the corresponding weak functions.
+  This is the recommended configuration in order to optimize memory/code
+  consumption footprint/performances.
+  [..]
+  The compilation define  USE_HAL_RTC_REGISTER_CALLBACKS when set to 1
+  allows the user to configure dynamically the driver callbacks.
+  Use Function HAL_RTC_RegisterCallback() to register an interrupt callback.
+  [..]
+  Function HAL_RTC_RegisterCallback() allows to register following callbacks:
+    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
+    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
+    (+) TimeStampEventCallback       : RTC Timestamp Event callback.
+    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
+    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback. (*)
+    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
+    (+) Tamper3EventCallback         : RTC Tamper 3 Event callback. (*)
+    (+) MspInitCallback              : RTC MspInit callback.
+    (+) MspDeInitCallback            : RTC MspDeInit callback.
+
+  (*) value not applicable to all devices.
+  [..]
+  This function takes as parameters the HAL peripheral handle, the Callback ID
+  and a pointer to the user callback function.
+  [..]
+  Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default
+  weak function.
+  HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+  and the Callback ID.
+  This function allows to reset following callbacks:
+    (+) AlarmAEventCallback          : RTC Alarm A Event callback.
+    (+) AlarmBEventCallback          : RTC Alarm B Event callback.
+    (+) TimeStampEventCallback       : RTC Timestamp Event callback.
+    (+) WakeUpTimerEventCallback     : RTC WakeUpTimer Event callback.
+    (+) Tamper1EventCallback         : RTC Tamper 1 Event callback. (*)
+    (+) Tamper2EventCallback         : RTC Tamper 2 Event callback.
+    (+) Tamper3EventCallback         : RTC Tamper 3 Event callback. (*)
+    (+) MspInitCallback              : RTC MspInit callback.
+    (+) MspDeInitCallback            : RTC MspDeInit callback.
+
+  (*) value not applicable to all devices.
+  [..]
+  By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET,
+  all callbacks are set to the corresponding weak functions:
+  examples AlarmAEventCallback(), TimeStampEventCallback().
+  Exception done for MspInit() and MspDeInit() callbacks that are reset to the
+  legacy weak function in the HAL_RTC_Init()/HAL_RTC_DeInit() only when these
+  callbacks are null (not registered beforehand).
+  If not, MspInit() or MspDeInit() are not null, HAL_RTC_Init()/HAL_RTC_DeInit()
+  keep and use the user MspInit()/MspDeInit() callbacks (registered beforehand).
+  [..]
+  Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only.
+  Exception done for MspInit() and MspDeInit() that can be registered/unregistered
+  in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state.
+  Thus registered (user) MspInit()/MspDeInit() callbacks can be used during the
+  Init/DeInit.
+  In that case first register the MspInit()/MspDeInit() user callbacks using
+  HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit() or HAL_RTC_Init()
+  functions.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32wbxx_hal.h"
+
+/** @addtogroup STM32WBxx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTC RTC
+  * @brief    RTC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+  * @{
+  */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..] This section provides functions allowing to initialize and configure the
+         RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+         RTC registers Write protection, enter and exit the RTC initialization mode,
+         RTC registers synchronization check and reference clock detection enable.
+         (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+             It is split into 2 programmable prescalers to minimize power consumption.
+             (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler.
+             (++) When both prescalers are used, it is recommended to configure the
+                 asynchronous prescaler to a high value to minimize power consumption.
+         (#) All RTC registers are Write protected. Writing to the RTC registers
+             is enabled by writing a key into the Write Protection register, RTC_WPR.
+         (#) To configure the RTC Calendar, user application should enter
+             initialization mode. In this mode, the calendar counter is stopped
+             and its value can be updated. When the initialization sequence is
+             complete, the calendar restarts counting after 4 RTCCLK cycles.
+         (#) To read the calendar through the shadow registers after Calendar
+             initialization, calendar update or after wakeup from low power modes
+             the software must first clear the RSF flag. The software must then
+             wait until it is set again before reading the calendar, which means
+             that the calendar registers have been correctly copied into the
+             RTC_TR and RTC_DR shadow registers. The HAL_RTC_WaitForSynchro() function
+             implements the above software sequence (RSF clear and RSF check).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RTC peripheral
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status;
+
+  /* Check RTC handler validity */
+  if (hrtc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+  assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+  assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+  assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+  assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut));
+  assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap));
+  assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+  assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+  if (hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+
+    hrtc->AlarmAEventCallback          =  HAL_RTC_AlarmAEventCallback;        /* Legacy weak AlarmAEventCallback      */
+    hrtc->AlarmBEventCallback          =  HAL_RTCEx_AlarmBEventCallback;      /* Legacy weak AlarmBEventCallback      */
+    hrtc->TimeStampEventCallback       =  HAL_RTCEx_TimeStampEventCallback;   /* Legacy weak TimeStampEventCallback   */
+    hrtc->WakeUpTimerEventCallback     =  HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
+#if defined(RTC_TAMPER1_SUPPORT)
+    hrtc->Tamper1EventCallback         =  HAL_RTCEx_Tamper1EventCallback;     /* Legacy weak Tamper1EventCallback     */
+#endif /* RTC_TAMPER1_SUPPORT */
+    hrtc->Tamper2EventCallback         =  HAL_RTCEx_Tamper2EventCallback;     /* Legacy weak Tamper2EventCallback     */
+#if defined(RTC_TAMPER3_SUPPORT)
+    hrtc->Tamper3EventCallback         =  HAL_RTCEx_Tamper3EventCallback;     /* Legacy weak Tamper3EventCallback     */
+#endif /* RTC_TAMPER3_SUPPORT */
+
+    if (hrtc->MspInitCallback == NULL)
+    {
+      hrtc->MspInitCallback = HAL_RTC_MspInit;
+    }
+    /* Init the low level hardware */
+    hrtc->MspInitCallback(hrtc);
+
+    if (hrtc->MspDeInitCallback == NULL)
+    {
+      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+    }
+  }
+#else /* USE_HAL_RTC_REGISTER_CALLBACKS */
+  if (hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+
+    /* Initialize RTC MSP */
+    HAL_RTC_MspInit(hrtc);
+  }
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Check whether the calendar needs to be initialized */
+  if (__HAL_RTC_IS_CALENDAR_INITIALIZED(hrtc) == 0U)
+  {
+    /* Disable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+    /* Enter Initialization mode */
+    status = RTC_EnterInitMode(hrtc);
+
+    if (status == HAL_OK)
+    {
+      /* Clear RTC_CR FMT, OSEL and POL Bits */
+      hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+      /* Set RTC_CR register */
+      hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+      /* Configure the RTC PRER */
+      hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+      hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos);
+
+      /* Exit Initialization mode */
+      status = RTC_ExitInitMode(hrtc);
+    }
+
+    if (status == HAL_OK)
+    {
+#if defined(RTC_OR_ALARMOUTTYPE)
+      hrtc->Instance->OR &= (uint32_t)~(RTC_OUTPUT_TYPE_PUSHPULL | RTC_OUTPUT_REMAP_POS1);
+      hrtc->Instance->OR |= (uint32_t)(hrtc->Init.OutPutType | hrtc->Init.OutPutRemap);
+#else
+      hrtc->Instance->OR &= (uint32_t)~RTC_OUTPUT_REMAP_POS1;
+      hrtc->Instance->OR |= (uint32_t)(hrtc->Init.OutPutRemap);
+#endif /* RTC_OR_ALARMOUTTYPE */
+    }
+
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  }
+  else
+  {
+    /* The calendar is already initialized */
+    status = HAL_OK;
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  DeInitializes the RTC peripheral
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This function does not reset the RTC Backup Data registers.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Reset RTC registers */
+    hrtc->Instance->TR = 0x00000000U;
+    hrtc->Instance->DR = (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0);
+    hrtc->Instance->CR = 0x00000000U;
+    hrtc->Instance->WUTR = RTC_WUTR_WUT;
+    hrtc->Instance->PRER = (uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU);
+    hrtc->Instance->ALRMAR   = 0x00000000U;
+    hrtc->Instance->ALRMBR   = 0x00000000U;
+    hrtc->Instance->CALR     = 0x00000000U;
+    hrtc->Instance->SHIFTR   = 0x00000000U;
+    hrtc->Instance->ALRMASSR = 0x00000000U;
+    hrtc->Instance->ALRMBSSR = 0x00000000U;
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Reset Tamper and alternate functions configuration register */
+    hrtc->Instance->TAMPCR = 0x00000000U;
+
+    /* Reset Option register */
+    hrtc->Instance->OR = 0x00000000U;
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+    if (hrtc->MspDeInitCallback == NULL)
+    {
+      hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+    }
+
+    /* DeInit the low level hardware: CLOCK, NVIC.*/
+    hrtc->MspDeInitCallback(hrtc);
+#else /* USE_HAL_RTC_REGISTER_CALLBACKS */
+    /* De-Initialize RTC MSP */
+    HAL_RTC_MspDeInit(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+    hrtc->State = HAL_RTC_STATE_RESET;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Registers a User RTC Callback
+  *         To be used instead of the weak predefined callback
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CallbackID ID of the callback to be registered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
+  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
+  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        Timestamp Event Callback ID
+  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wakeup Timer Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Event Callback ID (*)
+  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID          Tamper 3 Event Callback ID (*)
+  *          @arg @ref HAL_RTC_MSPINIT_CB_ID                MSP Init callback ID
+  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID              MSP DeInit callback ID
+  *
+  *         (*) value not applicable to all devices.
+  * @param  pCallback pointer to the Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hrtc);
+
+  if (HAL_RTC_STATE_READY == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_ALARM_A_EVENT_CB_ID :
+        hrtc->AlarmAEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_ALARM_B_EVENT_CB_ID :
+        hrtc->AlarmBEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
+        hrtc->TimeStampEventCallback = pCallback;
+        break;
+
+      case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
+        hrtc->WakeUpTimerEventCallback = pCallback;
+        break;
+
+#if defined(RTC_TAMPER1_SUPPORT)
+      case HAL_RTC_TAMPER1_EVENT_CB_ID :
+        hrtc->Tamper1EventCallback = pCallback;
+        break;
+#endif /* RTC_TAMPER1_SUPPORT */
+
+      case HAL_RTC_TAMPER2_EVENT_CB_ID :
+        hrtc->Tamper2EventCallback = pCallback;
+        break;
+
+#if defined(RTC_TAMPER3_SUPPORT)
+      case HAL_RTC_TAMPER3_EVENT_CB_ID :
+        hrtc->Tamper3EventCallback = pCallback;
+        break;
+#endif /* RTC_TAMPER3_SUPPORT */
+
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_RTC_STATE_RESET == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = pCallback;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Unregisters an RTC Callback
+  *         RTC callback is redirected to the weak predefined callback
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CallbackID ID of the callback to be unregistered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID          Alarm A Event Callback ID
+  *          @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID          Alarm B Event Callback ID
+  *          @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID        Timestamp Event Callback ID
+  *          @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID      Wakeup Timer Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID          Tamper 1 Event Callback ID (*)
+  *          @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID          Tamper 2 Event Callback ID
+  *          @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID          Tamper 3 Event Callback ID (*)
+  *          @arg @ref HAL_RTC_MSPINIT_CB_ID                MSP Init callback ID
+  *          @arg @ref HAL_RTC_MSPDEINIT_CB_ID              MSP DeInit callback ID
+  *
+  *         (*) value not applicable to all devices.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hrtc);
+
+  if (HAL_RTC_STATE_READY == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_ALARM_A_EVENT_CB_ID :
+        hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback;             /* Legacy weak AlarmAEventCallback    */
+        break;
+
+      case HAL_RTC_ALARM_B_EVENT_CB_ID :
+        hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback;           /* Legacy weak AlarmBEventCallback */
+        break;
+
+      case HAL_RTC_TIMESTAMP_EVENT_CB_ID :
+        hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback;     /* Legacy weak TimeStampEventCallback    */
+        break;
+
+      case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID :
+        hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */
+        break;
+
+#if defined(RTC_TAMPER1_SUPPORT)
+      case HAL_RTC_TAMPER1_EVENT_CB_ID :
+        hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback;         /* Legacy weak Tamper1EventCallback   */
+        break;
+#endif /* RTC_TAMPER1_SUPPORT */
+
+      case HAL_RTC_TAMPER2_EVENT_CB_ID :
+        hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback;         /* Legacy weak Tamper2EventCallback         */
+        break;
+
+#if defined(RTC_TAMPER3_SUPPORT)
+      case HAL_RTC_TAMPER3_EVENT_CB_ID :
+        hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback;         /* Legacy weak Tamper3EventCallback         */
+        break;
+#endif /* RTC_TAMPER3_SUPPORT */
+
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = HAL_RTC_MspInit;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_RTC_STATE_RESET == hrtc->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_RTC_MSPINIT_CB_ID :
+        hrtc->MspInitCallback = HAL_RTC_MspInit;
+        break;
+
+      case HAL_RTC_MSPDEINIT_CB_ID :
+        hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Initializes the RTC MSP.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the RTC MSP.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+  * @brief    RTC Time and Date functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets RTC current time.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime Pointer to Time structure
+  * @note   DayLightSaving and StoreOperation interfaces are deprecated.
+  *         To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions.
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+  assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sTime->Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sTime->Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sTime->Minutes));
+    assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+    tmpreg = (uint32_t)(( (uint32_t)RTC_ByteToBcd2(sTime->Hours)   << RTC_TR_HU_Pos)  | \
+                        ( (uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \
+                        ( (uint32_t)RTC_ByteToBcd2(sTime->Seconds))                   | \
+                        (((uint32_t)sTime->TimeFormat)             << RTC_TR_PM_Pos));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+    }
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+    tmpreg = (((uint32_t)(sTime->Hours)      << RTC_TR_HU_Pos)  | \
+              ((uint32_t)(sTime->Minutes)    << RTC_TR_MNU_Pos) | \
+              ((uint32_t) sTime->Seconds)                       | \
+              ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Set the RTC_TR register */
+    hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+    /* Clear the bits to be configured (Deprecated. Use HAL_RTC_DST_xxx functions instead) */
+    hrtc->Instance->CR &= (uint32_t)~RTC_CR_BKP;
+
+    /* Configure the RTC_CR register (Deprecated. Use HAL_RTC_DST_xxx functions instead) */
+    hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Gets RTC current time.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime Pointer to Time structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @note  You can use SubSeconds and SecondFraction (sTime structure fields
+  *        returned) to convert SubSeconds value in second fraction ratio with
+  *        time unit following generic formula:
+  *        Second fraction ratio * time_unit =
+  *           [(SecondFraction - SubSeconds) / (SecondFraction + 1)] * time_unit
+  *        This conversion can be performed only if no shift operation is pending
+  *        (ie. SHFP=0) when PREDIV_S >= SS
+  * @note  You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the
+  *        values in the higher-order calendar shadow registers to ensure
+  *        consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers
+  *        until current date is read to ensure consistency between the time and
+  *        date values.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get subseconds value from the corresponding register */
+  sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+  /* Get SecondFraction structure field from the corresponding register field*/
+  sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
+
+  /* Get the TR register */
+  tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sTime->Hours      = (uint8_t)((tmpreg & (RTC_TR_HT  | RTC_TR_HU))  >> RTC_TR_HU_Pos);
+  sTime->Minutes    = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos);
+  sTime->Seconds    = (uint8_t)( tmpreg & (RTC_TR_ST  | RTC_TR_SU));
+  sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM))               >> RTC_TR_PM_Pos);
+
+  /* Check the input parameters format */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the time structure parameters to Binary format */
+    sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+    sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+    sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets RTC current date.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate Pointer to date structure
+  * @param  Format specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0U;
+  HAL_StatusTypeDef status;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U))
+  {
+    sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU);
+  }
+
+  assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    assert_param(IS_RTC_YEAR(sDate->Year));
+    assert_param(IS_RTC_MONTH(sDate->Month));
+    assert_param(IS_RTC_DATE(sDate->Date));
+
+    datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year)  << RTC_DR_YU_Pos) | \
+                  ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \
+                  ((uint32_t)RTC_ByteToBcd2(sDate->Date))                   | \
+                  ((uint32_t)sDate->WeekDay               << RTC_DR_WDU_Pos));
+  }
+  else
+  {
+    assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+    assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month)));
+    assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date)));
+
+    datetmpreg = ((((uint32_t)sDate->Year)    << RTC_DR_YU_Pos) | \
+                  (((uint32_t)sDate->Month)   << RTC_DR_MU_Pos) | \
+                  ((uint32_t) sDate->Date)                      | \
+                  (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Enter Initialization mode */
+  status = RTC_EnterInitMode(hrtc);
+
+  if (status == HAL_OK)
+  {
+    /* Set the RTC_DR register */
+    hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+    /* Exit Initialization mode */
+    status = RTC_ExitInitMode(hrtc);
+  }
+
+  if (status == HAL_OK)
+  {
+    hrtc->State = HAL_RTC_STATE_READY;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return status;
+}
+
+/**
+  * @brief  Gets RTC current date.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate Pointer to Date structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN:  Binary data format
+  *            @arg RTC_FORMAT_BCD:  BCD data format
+  * @note  You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the
+  *        values in the higher-order calendar shadow registers to ensure
+  *        consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers
+  *        until current date is read to ensure consistency between the time and
+  *        date values.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the DR register */
+  datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sDate->Year    = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos);
+  sDate->Month   = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos);
+  sDate->Date    = (uint8_t) (datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+  sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU))            >> RTC_DR_WDU_Pos);
+
+  /* Check the input parameters format */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the date structure parameters to Binary format */
+    sDate->Year  = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+    sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+    sDate->Date  = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+  * @brief    RTC Alarm functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Sets the specified RTC Alarm.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Alarm structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @note   The Alarm register can only be written when the corresponding Alarm
+  *         is disabled (Use the HAL_RTC_DeactivateAlarm()).
+  * @note   The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0U;
+  uint32_t tmpreg = 0U;
+  uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Check the data format (binary or BCD) and store the Alarm time and date
+     configuration accordingly */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours)   << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds))                       | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat)            << RTC_ALRMAR_PM_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay)  << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel)                                     | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours)      << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes)    << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds)                           | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay)     << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t) sAlarm->AlarmDateWeekDaySel)                         | \
+              ((uint32_t) sAlarm->AlarmMask));
+  }
+
+  /* Store the Alarm subseconds configuration */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \
+                               (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  if (sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Clear Alarm A flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Configure Alarm A register */
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure Alarm A Subseconds register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Enable Alarm A */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+  }
+  else
+  {
+    /* Disable Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Clear Alarm B flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Configure Alarm B register */
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure Alarm B Subseconds register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Enable Alarm B */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the specified RTC Alarm with Interrupt.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Alarm structure
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @note   The Alarm register can only be written when the corresponding Alarm
+  *         is disabled (Use the HAL_RTC_DeactivateAlarm()).
+  * @note   The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  __IO uint32_t count  = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+       uint32_t tmpreg = 0U;
+       uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  /* Change RTC state to BUSY */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Check the data format (binary or BCD) and store the Alarm time and date
+     configuration accordingly */
+  if (Format == RTC_FORMAT_BIN)
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours)   << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds))                       | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat)            << RTC_ALRMAR_PM_Pos)  | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay)  << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel)                                     | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U)
+    {
+      assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00U;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay)));
+    }
+
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours)      << RTC_ALRMAR_HU_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes)    << RTC_ALRMAR_MNU_Pos) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds)                           | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos)  | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay)     << RTC_ALRMAR_DU_Pos)  | \
+              ((uint32_t) sAlarm->AlarmDateWeekDaySel)                         | \
+              ((uint32_t) sAlarm->AlarmMask));
+  }
+
+  /* Store the Alarm subseconds configuration */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \
+                               (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  if (sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* Clear Alarm A flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */
+    do
+    {
+      count = count - 1U;
+      if (count == 0U)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U);
+
+  /* Configure Alarm A register */
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure Alarm A Subseconds register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Enable Alarm A */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+    /* Enable Alarm A interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA);
+  }
+  else
+  {
+    /* Disable Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* Clear Alarm B flag */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Reload the counter */
+    count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+
+    /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */
+    do
+    {
+      count = count - 1U;
+      if (count == 0U)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U);
+
+    /* Configure Alarm B register */
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure Alarm B Subseconds register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Enable Alarm B */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+    /* Enable Alarm B interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+  }
+
+  /* Enable and configure the EXTI line associated to the RTC Alarm interrupt */
+  __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+  __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state back to READY */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the specified RTC Alarm.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Alarm Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A: Alarm A
+  *            @arg RTC_ALARM_B: Alarm B
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  if (Alarm == RTC_ALARM_A)
+  {
+    /* Disable Alarm A */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  else
+  {
+    /* Disable Alarm B */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case interrupt mode is used, the interrupt source must be disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if timeout is reached exit */
+    while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U)
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC Alarm value and masks.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm Pointer to Date structure
+  * @param  Alarm Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A: Alarm A
+  *            @arg RTC_ALARM_B: Alarm B
+  * @param  Format Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+  uint32_t tmpreg = 0U;
+  uint32_t subsecondtmpreg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  if (Alarm == RTC_ALARM_A)
+  {
+    sAlarm->Alarm = RTC_ALARM_A;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS);
+  }
+  else
+  {
+    sAlarm->Alarm = RTC_ALARM_B;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+  }
+
+  /* Fill the structure with the read parameters */
+  sAlarm->AlarmTime.Hours      = (uint8_t) ((tmpreg & (RTC_ALRMAR_HT  | RTC_ALRMAR_HU))  >> RTC_ALRMAR_HU_Pos);
+  sAlarm->AlarmTime.Minutes    = (uint8_t) ((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos);
+  sAlarm->AlarmTime.Seconds    = (uint8_t) ( tmpreg & (RTC_ALRMAR_ST  | RTC_ALRMAR_SU));
+  sAlarm->AlarmTime.TimeFormat = (uint8_t) ((tmpreg & RTC_ALRMAR_PM)                     >> RTC_TR_PM_Pos);
+  sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+  sAlarm->AlarmDateWeekDay     = (uint8_t) ((tmpreg & (RTC_ALRMAR_DT  | RTC_ALRMAR_DU))  >> RTC_ALRMAR_DU_Pos);
+  sAlarm->AlarmDateWeekDaySel  = (uint32_t) (tmpreg & RTC_ALRMAR_WDSEL);
+  sAlarm->AlarmMask            = (uint32_t) (tmpreg & RTC_ALARMMASK_ALL);
+
+  if (Format == RTC_FORMAT_BIN)
+  {
+    sAlarm->AlarmTime.Hours   = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+    sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+    sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+    sAlarm->AlarmDateWeekDay  = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles Alarm interrupt request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  /* Clear the EXTI flag associated to the RTC Alarm interrupt */
+  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+  /* Get the Alarm A interrupt source enable status */
+  if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U)
+  {
+    /* Get the pending status of the Alarm A Interrupt */
+    if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U)
+    {
+      /* Clear the Alarm A interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+      /* Alarm A callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->AlarmAEventCallback(hrtc);
+#else
+      HAL_RTC_AlarmAEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+    }
+  }
+
+  /* Get the Alarm B interrupt source enable status */
+  if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != 0U)
+  {
+    /* Get the pending status of the Alarm B Interrupt */
+    if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != 0U)
+    {
+      /* Clear the Alarm B interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+      /* Alarm B callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+      hrtc->AlarmBEventCallback(hrtc);
+#else
+      HAL_RTCEx_AlarmBEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+    }
+  }
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Alarm A callback.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Handles Alarm A Polling request.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC ALRAF flag is set and if timeout is reached exit */
+  while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Alarm flag */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+  * @brief    Peripheral Control functions
+  *
+@verbatim
+ ===============================================================================
+                     ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Wait for RTC Time and Date Synchronization
+      (+) Manage RTC Summer or Winter time change
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+  *         synchronized with RTC APB clock.
+  * @note   The RTC Resynchronization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @note   To read the calendar through the shadow registers after Calendar
+  *         initialization, calendar update or after wakeup from low power modes
+  *         the software must first clear the RSF flag.
+  *         The software must then wait until it is set again before reading
+  *         the calendar, which means that the calendar registers have been
+  *         correctly copied into the RTC_TR and RTC_DR shadow registers.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0U;
+
+  /* Clear RSF flag, keep reserved bits at reset values (setting other flags has no effect) */
+  hrtc->Instance->ISR = ((uint32_t)(RTC_RSF_MASK & RTC_ISR_RESERVED_MASK));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait the registers to be synchronised */
+  while ((hrtc->Instance->ISR & RTC_ISR_RSF) == 0U)
+  {
+    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Daylight Saving Time, adds one hour to the calendar in one
+  *         single operation without going through the initialization procedure.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, subtracts one hour from the calendar in one
+  *         single operation without going through the initialization procedure.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, sets the store operation bit.
+  * @note   It can be used by the software in order to memorize the DST status.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  SET_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, clears the store operation bit.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+  * @brief  Daylight Saving Time, reads the store operation bit.
+  * @param  hrtc RTC handle
+  * @retval operation see RTC_StoreOperation_Definitions
+  */
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+  return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+  * @brief    Peripheral State functions
+  *
+@verbatim
+ ===============================================================================
+                     ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Get RTC state
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Returns the RTC state.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL state
+  */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc)
+{
+  return hrtc->State;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Enters the RTC Initialization mode.
+  * @note   The RTC Initialization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0U;
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check that Initialization mode is not already set */
+  if (READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U)
+  {
+    /* Set INIT bit to enter Initialization mode */
+    SET_BIT(hrtc->Instance->ISR, RTC_ISR_INIT);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC is in INIT state and if timeout is reached exit */
+    while ((READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) && (status != HAL_ERROR))
+    {
+      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+      {
+        /* Set RTC state */
+        hrtc->State = HAL_RTC_STATE_ERROR;
+        status = HAL_ERROR;
+      }
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Exits the RTC Initialization mode.
+  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Clear INIT bit to exit Initialization mode */
+  CLEAR_BIT(hrtc->Instance->ISR, RTC_ISR_INIT);
+
+  /* If CR_BYPSHAD bit = 0, wait for synchro */
+  if (READ_BIT(hrtc->Instance->CR, RTC_CR_BYPSHAD) == 0U)
+  {
+    if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+    {
+      /* Set RTC state */
+      hrtc->State = HAL_RTC_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Converts a 2-digit number from decimal to BCD format.
+  * @param  number decimal-formatted number (from 0 to 99) to be converted
+  * @retval Converted byte
+  */
+uint8_t RTC_ByteToBcd2(uint8_t number)
+{
+  uint32_t bcdhigh = 0U;
+
+  while (number >= 10U)
+  {
+    bcdhigh++;
+    number -= 10U;
+  }
+
+  return ((uint8_t)(bcdhigh << 4U) | number);
+}
+
+/**
+  * @brief  Converts a 2-digit number from BCD to decimal format.
+  * @param  number BCD-formatted number (from 00 to 99) to be converted
+  * @retval Converted word
+  */
+uint8_t RTC_Bcd2ToByte(uint8_t number)
+{
+  uint32_t tens = 0U;
+  tens = (((uint32_t)number & 0xF0U) >> 4U) * 10U;
+  return (uint8_t)(tens + ((uint32_t)number & 0x0FU));
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */