diff options
Diffstat (limited to 'firmware/rf test/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h')
| -rw-r--r-- | firmware/rf test/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/firmware/rf test/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h b/firmware/rf test/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h new file mode 100644 index 0000000..2bec4dd --- /dev/null +++ b/firmware/rf test/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h @@ -0,0 +1,230 @@ +/** + ****************************************************************************** + * @file stm32wbxx.h + * @author MCD Application Team + * @brief CMSIS STM32WBxx Device Peripheral Access Layer Header File. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The STM32WBxx device used in the target application + * - To use or not the peripheral's drivers in application code(i.e. + * code will be based on direct access to peripheral's registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019-2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32wbxx + * @{ + */ + +#ifndef __STM32WBxx_H +#define __STM32WBxx_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32WB) +#define STM32WB +#endif /* STM32WB */ + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +/*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number + */ +#define __STM32WBxx_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32WBxx_CMSIS_VERSION_SUB1 (0x0CU) /*!< [23:16] sub1 version */ +#define __STM32WBxx_CMSIS_VERSION_SUB2 (0x03U) /*!< [15:8] sub2 version */ +#define __STM32WBxx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32WBxx_CMSIS_DEVICE_VERSION ((__STM32WBxx_CMSIS_VERSION_MAIN << 24)\ + |(__STM32WBxx_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32WBxx_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32WBxx_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32WB55xx) +#include "stm32wb55xx.h" +#elif defined(STM32WB5Mxx) +#include "stm32wb5mxx.h" +#elif defined(STM32WB50xx) +#include "stm32wb50xx.h" +#elif defined(STM32WB35xx) +#include "stm32wb35xx.h" +#elif defined(STM32WB30xx) +#include "stm32wb30xx.h" +#elif defined(STM32WB15xx) +#include "stm32wb15xx.h" +#elif defined(STM32WB10xx) +#include "stm32wb10xx.h" +#elif defined(STM32WB1Mxx) +#include "stm32wb1mxx.h" +#else +#error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)" +#endif +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/* Use of CMSIS compiler intrinsics for register exclusive access */ +/* Atomic 32-bit register access macro to set one or several bits */ +#define ATOMIC_SET_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEAR_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint32_t val; \ + do { \ + val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to set one or several bits */ +#define ATOMIC_SETH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEARH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint16_t val; \ + do { \ + val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) +#include "stm32wbxx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32WBxx_H */ +/** + * @} + */ + +/** + * @} + */ |