diff options
Diffstat (limited to 'firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h')
| -rw-r--r-- | firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h | 3443 |
1 files changed, 3443 insertions, 0 deletions
diff --git a/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h b/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h new file mode 100644 index 0000000..50b7509 --- /dev/null +++ b/firmware/rf test/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h @@ -0,0 +1,3443 @@ +/** + ****************************************************************************** + * @file stm32wbxx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WBxx_HAL_RCC_H +#define STM32WBxx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx_hal_def.h" +#include "stm32wbxx_ll_rcc.h" +#include "stm32wbxx_ll_bus.h" + + +/** @addtogroup STM32WBxx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#define CRRCR_REG_INDEX 4U + +#define RCC_FLAG_MASK 0x1FU + +/* Defines Oscillator Masks */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_MSI | \ + RCC_OSCILLATORTYPE_LSI1 | RCC_OSCILLATORTYPE_LSI2 | \ + RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#else +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI1 | \ + RCC_OSCILLATORTYPE_LSI2 | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_Reset_Flag Reset Flag + * @{ + */ +#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */ +#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define RCC_RESET_FLAG_PWR RCC_CSR_BORRSTF /*!< BOR or POR/PDR reset flag */ +#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */ +#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ + RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ + RCC_RESET_FLAG_LPWR) +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & ~RCC_OSCILLATORTYPE_ALL) == 0x00U)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_LSI2_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)15U) + + +#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON)) + + +#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)255U) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_MSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLM_VALUE(__VALUE__) (((__VALUE__) == RCC_PLLM_DIV1) || \ + ((__VALUE__) == RCC_PLLM_DIV2) || \ + ((__VALUE__) == RCC_PLLM_DIV3) || \ + ((__VALUE__) == RCC_PLLM_DIV4) || \ + ((__VALUE__) == RCC_PLLM_DIV5) || \ + ((__VALUE__) == RCC_PLLM_DIV6) || \ + ((__VALUE__) == RCC_PLLM_DIV7) || \ + ((__VALUE__) == RCC_PLLM_DIV8)) + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) + +#define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) + +#define IS_RCC_PLLQ_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8)) + +#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) + +#if defined(SAI1) +#define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_ADCCLK) == RCC_PLLSAI1_ADCCLK) || \ + (((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_USBCLK) == RCC_PLLSAI1_USBCLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI1_ADCCLK | RCC_PLLSAI1_SAI1CLK | \ + RCC_PLLSAI1_USBCLK)) == 0U)) +#endif /* SAI1 */ +#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ + ((__RANGE__) == RCC_MSIRANGE_1) || \ + ((__RANGE__) == RCC_MSIRANGE_2) || \ + ((__RANGE__) == RCC_MSIRANGE_3) || \ + ((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6) || \ + ((__RANGE__) == RCC_MSIRANGE_7) || \ + ((__RANGE__) == RCC_MSIRANGE_8) || \ + ((__RANGE__) == RCC_MSIRANGE_9) || \ + ((__RANGE__) == RCC_MSIRANGE_10) || \ + ((__RANGE__) == RCC_MSIRANGE_11)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= (RCC_CLOCKTYPE_SYSCLK | \ + RCC_CLOCKTYPE_HCLK | \ + RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | \ + RCC_CLOCKTYPE_HCLK2 | \ + RCC_CLOCKTYPE_HCLK4))) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLKx(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || ((__HCLK__) == RCC_SYSCLK_DIV3) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV5) || ((__HCLK__) == RCC_SYSCLK_DIV6) || \ + ((__HCLK__) == RCC_SYSCLK_DIV8) || ((__HCLK__) == RCC_SYSCLK_DIV10) || ((__HCLK__) == RCC_SYSCLK_DIV16) || \ + ((__HCLK__) == RCC_SYSCLK_DIV32) || ((__HCLK__) == RCC_SYSCLK_DIV64) || ((__HCLK__) == RCC_SYSCLK_DIV128) || \ + ((__HCLK__) == RCC_SYSCLK_DIV256) || ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLKx(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#if defined(RCC_MCO3_SUPPORT) +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1_PA8) || \ + ((__MCOX__) == RCC_MCO2_PB6) || \ + ((__MCOX__) == RCC_MCO3_PA15)) +#else +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1_PA8) || \ + ((__MCOX__) == RCC_MCO2_PB6)) +#endif /* RCC_MCO3_SUPPORT */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI1) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI2) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI1) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI2) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_MCO2SOURCE(__SOURCE__) IS_RCC_MCO1SOURCE((__SOURCE__)) +#define IS_RCC_MCO3SOURCE(__SOURCE__) IS_RCC_MCO1SOURCE((__SOURCE__)) + + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)) + + + + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \ + ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI)) +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter must be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a value of @ref RCC_PLLM_Clock_Divider */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 6 and Max_Data = 127 */ + + uint32_t PLLP; /*!< PLLP: Division factor for SAI & ADC clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for RNG and USB clocks. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ + + uint32_t PLLR; /*!< PLLR: Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, HSI48, MSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a combination of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is @ref RCC_HSICALIBRATION_DEFAULT).*/ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + uint32_t LSI2CalibrationValue; /*!< The LSI2 calibration trimming value . + This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t MSIState; /*!< The new state of the MSI. + This parameter can be a value of @ref RCC_MSI_Config */ + + uint32_t MSICalibrationValue; /*!< The calibration trimming value (default is @ref RCC_MSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t MSIClockRange; /*!< The MSI frequency range. + This parameter can be a value of @ref RCC_MSI_Clock_Range */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48 . + This parameter can be a value of @ref RCC_HSI48_Config */ +#endif /* RCC_HSI48_SUPPORT */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a combination of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHBx clock (HCLK1) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHBx_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APBx_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APBx_Clock_Source */ + + uint32_t AHBCLK2Divider; /*!< The AHB clock (HCLK2) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHBx_Clock_Source */ + + uint32_t AHBCLK4Divider; /*!< The AHB shared clock (HCLK4) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHBx_Clock_Source */ + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI1 0x00000008U /*!< LSI1 to configure */ +#define RCC_OSCILLATORTYPE_LSI2 0x00000010U /*!< LSI2 to configure */ +#define RCC_OSCILLATORTYPE_MSI 0x00000020U /*!< MSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000040U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON (RCC_CSR_LSI1ON | RCC_CSR_LSI2ON) /*!< LSI1 or LSI2 clock activation */ +/** + * @} + */ + +/** @defgroup RCC_MSI_Config MSI Config + * @{ + */ +#define RCC_MSI_OFF 0x00000000U /*!< MSI clock deactivation */ +#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */ + +#define RCC_MSICALIBRATION_DEFAULT 0U /*!< Default MSI calibration trimming value */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CRRCR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +/** @defgroup RCC_PLLM_Clock_Divider PLLM Clock Divider + * @{ + */ +#define RCC_PLLM_DIV1 LL_RCC_PLLM_DIV_1 /*!< PLLM division factor = 1 */ +#define RCC_PLLM_DIV2 LL_RCC_PLLM_DIV_2 /*!< PLLM division factor = 2 */ +#define RCC_PLLM_DIV3 LL_RCC_PLLM_DIV_3 /*!< PLLM division factor = 3 */ +#define RCC_PLLM_DIV4 LL_RCC_PLLM_DIV_4 /*!< PLLM division factor = 4 */ +#define RCC_PLLM_DIV5 LL_RCC_PLLM_DIV_5 /*!< PLLM division factor = 5 */ +#define RCC_PLLM_DIV6 LL_RCC_PLLM_DIV_6 /*!< PLLM division factor = 6 */ +#define RCC_PLLM_DIV7 LL_RCC_PLLM_DIV_7 /*!< PLLM division factor = 7 */ +#define RCC_PLLM_DIV8 LL_RCC_PLLM_DIV_8 /*!< PLLM division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#define RCC_PLLP_DIV2 LL_RCC_PLLP_DIV_2 /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 LL_RCC_PLLP_DIV_3 /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 LL_RCC_PLLP_DIV_4 /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 LL_RCC_PLLP_DIV_5 /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 LL_RCC_PLLP_DIV_6 /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 LL_RCC_PLLP_DIV_7 /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 LL_RCC_PLLP_DIV_8 /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 LL_RCC_PLLP_DIV_9 /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 LL_RCC_PLLP_DIV_10 /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 LL_RCC_PLLP_DIV_11 /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 LL_RCC_PLLP_DIV_12 /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 LL_RCC_PLLP_DIV_13 /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 LL_RCC_PLLP_DIV_14 /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 LL_RCC_PLLP_DIV_15 /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 LL_RCC_PLLP_DIV_16 /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 LL_RCC_PLLP_DIV_17 /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 LL_RCC_PLLP_DIV_18 /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 LL_RCC_PLLP_DIV_19 /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 LL_RCC_PLLP_DIV_20 /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 LL_RCC_PLLP_DIV_21 /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 LL_RCC_PLLP_DIV_22 /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 LL_RCC_PLLP_DIV_23 /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 LL_RCC_PLLP_DIV_24 /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 LL_RCC_PLLP_DIV_25 /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 LL_RCC_PLLP_DIV_26 /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 LL_RCC_PLLP_DIV_27 /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 LL_RCC_PLLP_DIV_28 /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 LL_RCC_PLLP_DIV_29 /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 LL_RCC_PLLP_DIV_30 /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 LL_RCC_PLLP_DIV_31 /*!< PLLP division factor = 31 */ +#define RCC_PLLP_DIV32 LL_RCC_PLLP_DIV_32 /*!< PLLP division factor = 32 */ +/** + * @} + */ + +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 LL_RCC_PLLQ_DIV_2 /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV3 LL_RCC_PLLQ_DIV_3 /*!< PLLQ division factor = 3 */ +#define RCC_PLLQ_DIV4 LL_RCC_PLLQ_DIV_4 /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV5 LL_RCC_PLLQ_DIV_5 /*!< PLLQ division factor = 5 */ +#define RCC_PLLQ_DIV6 LL_RCC_PLLQ_DIV_6 /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV7 LL_RCC_PLLQ_DIV_7 /*!< PLLQ division factor = 7 */ +#define RCC_PLLQ_DIV8 LL_RCC_PLLQ_DIV_8 /*!< PLLQ division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 LL_RCC_PLLR_DIV_2 /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV3 LL_RCC_PLLR_DIV_3 /*!< PLLR division factor = 3 */ +#define RCC_PLLR_DIV4 LL_RCC_PLLR_DIV_4 /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV5 LL_RCC_PLLR_DIV_5 /*!< PLLR division factor = 5 */ +#define RCC_PLLR_DIV6 LL_RCC_PLLR_DIV_6 /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV7 LL_RCC_PLLR_DIV_7 /*!< PLLR division factor = 7 */ +#define RCC_PLLR_DIV8 LL_RCC_PLLR_DIV_8 /*!< PLLR division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE LL_RCC_PLLSOURCE_NONE /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_MSI LL_RCC_PLLSOURCE_MSI /*!< MSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI LL_RCC_PLLSOURCE_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE LL_RCC_PLLSOURCE_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */ +#define RCC_PLL_USBCLK RCC_PLLCFGR_PLLQEN /*!< PLLUSBCLK selection from main PLL */ +#define RCC_PLL_RNGCLK RCC_PLLCFGR_PLLQEN /*!< PLLRNGCLK selection from main PLL */ +#if defined(SAI1) +#define RCC_PLL_SAI1CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI1CLK selection from main PLL */ +#endif /* SAI1 */ +#define RCC_PLL_ADCCLK RCC_PLLCFGR_PLLPEN /*!< PLLADCCLK selection from main PLL */ +/** + * @} + */ + +#if defined(SAI1) +/** @defgroup RCC_PLLSAI1_Clock_Output PLLSAI1 Clock Output + * @{ + */ +#define RCC_PLLSAI1_ADCCLK RCC_PLLSAI1CFGR_PLLREN /*!< PLLADCCLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_USBCLK RCC_PLLSAI1CFGR_PLLQEN /*!< USBCLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_SAI1CLK RCC_PLLSAI1CFGR_PLLPEN /*!< PLLSAI1CLK selection from PLLSAI1 */ +/** + * @} + */ +#endif /* SAI1 */ + +/** @defgroup RCC_MSI_Clock_Range MSI Clock Range + * @{ + */ +#define RCC_MSIRANGE_0 LL_RCC_MSIRANGE_0 /*!< MSI = 100 KHz */ +#define RCC_MSIRANGE_1 LL_RCC_MSIRANGE_1 /*!< MSI = 200 KHz */ +#define RCC_MSIRANGE_2 LL_RCC_MSIRANGE_2 /*!< MSI = 400 KHz */ +#define RCC_MSIRANGE_3 LL_RCC_MSIRANGE_3 /*!< MSI = 800 KHz */ +#define RCC_MSIRANGE_4 LL_RCC_MSIRANGE_4 /*!< MSI = 1 MHz */ +#define RCC_MSIRANGE_5 LL_RCC_MSIRANGE_5 /*!< MSI = 2 MHz */ +#define RCC_MSIRANGE_6 LL_RCC_MSIRANGE_6 /*!< MSI = 4 MHz */ +#define RCC_MSIRANGE_7 LL_RCC_MSIRANGE_7 /*!< MSI = 8 MHz */ +#define RCC_MSIRANGE_8 LL_RCC_MSIRANGE_8 /*!< MSI = 16 MHz */ +#define RCC_MSIRANGE_9 LL_RCC_MSIRANGE_9 /*!< MSI = 24 MHz */ +#define RCC_MSIRANGE_10 LL_RCC_MSIRANGE_10 /*!< MSI = 32 MHz */ +#define RCC_MSIRANGE_11 LL_RCC_MSIRANGE_11 /*!< MSI = 48 MHz */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ +#define RCC_CLOCKTYPE_HCLK2 0x00000020U /*!< HCLK2 to configure */ +#define RCC_CLOCKTYPE_HCLK4 0x00000040U /*!< HCLK4 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_MSI LL_RCC_SYS_CLKSOURCE_MSI /*!< MSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSI LL_RCC_SYS_CLKSOURCE_HSI /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE LL_RCC_SYS_CLKSOURCE_HSE /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK LL_RCC_SYS_CLKSOURCE_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_MSI LL_RCC_SYS_CLKSOURCE_STATUS_MSI /*!< MSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSI LL_RCC_SYS_CLKSOURCE_STATUS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE LL_RCC_SYS_CLKSOURCE_STATUS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK LL_RCC_SYS_CLKSOURCE_STATUS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHBx_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 LL_RCC_SYSCLK_DIV_1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 LL_RCC_SYSCLK_DIV_2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV3 LL_RCC_SYSCLK_DIV_3 /*!< SYSCLK divided by 3 */ +#define RCC_SYSCLK_DIV4 LL_RCC_SYSCLK_DIV_4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV5 LL_RCC_SYSCLK_DIV_5 /*!< SYSCLK divided by 5 */ +#define RCC_SYSCLK_DIV6 LL_RCC_SYSCLK_DIV_6 /*!< SYSCLK divided by 6 */ +#define RCC_SYSCLK_DIV8 LL_RCC_SYSCLK_DIV_8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV10 LL_RCC_SYSCLK_DIV_10 /*!< SYSCLK divided by 10 */ +#define RCC_SYSCLK_DIV16 LL_RCC_SYSCLK_DIV_16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV32 LL_RCC_SYSCLK_DIV_32 /*!< SYSCLK divided by 32 */ +#define RCC_SYSCLK_DIV64 LL_RCC_SYSCLK_DIV_64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 LL_RCC_SYSCLK_DIV_128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 LL_RCC_SYSCLK_DIV_256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 LL_RCC_SYSCLK_DIV_512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APBx_Clock_Source APB1 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 LL_RCC_APB1_DIV_1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 LL_RCC_APB1_DIV_2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 LL_RCC_APB1_DIV_4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 LL_RCC_APB1_DIV_8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 LL_RCC_APB1_DIV_16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE LL_RCC_RTC_CLKSOURCE_NONE /*!< No clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSE LL_RCC_RTC_CLKSOURCE_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI LL_RCC_RTC_CLKSOURCE_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 LL_RCC_RTC_CLKSOURCE_HSE_DIV32 /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ + +/* @cond */ +/* 32 28 20 16 0 + -------------------------------- + | MCO | GPIO | GPIO | GPIO | + | Index | AF | Port | Pin | + -------------------------------*/ + +#define RCC_MCO_GPIOPORT_POS 16U +#define RCC_MCO_GPIOPORT_MASK (0xFUL << RCC_MCO_GPIOPORT_POS) +#define RCC_MCO_GPIOAF_POS 20U +#define RCC_MCO_GPIOAF_MASK (0xFFUL << RCC_MCO_GPIOAF_POS) +#define RCC_MCO_INDEX_POS 28U +#define RCC_MCO_INDEX_MASK (0x1UL << RCC_MCO_INDEX_POS) + +#define RCC_MCO1_INDEX (0x0UL << RCC_MCO_INDEX_POS) /*!< MCO1 index */ +#define RCC_MCO2_INDEX (0x1UL << RCC_MCO_INDEX_POS) /*!< MCO2 index */ +/* @endcond */ + +#define RCC_MCO1_PA8 (RCC_MCO1_INDEX | \ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8) +#define RCC_MCO1 RCC_MCO1_PA8 /*!< Alias for compatibility */ + +#define RCC_MCO2_PB6 (RCC_MCO2_INDEX | \ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOB) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_6) +#define RCC_MCO2 RCC_MCO2_PB6 /*!< Alias for compatibility */ + +#if defined(RCC_MCO3_SUPPORT) +/* @cond */ +#define RCC_MCO3_INDEX (0x2UL << RCC_MCO_INDEX_POS) /*!< MCO3 index */ +/* @endcond */ + +#define RCC_MCO3_PA15 (RCC_MCO3_INDEX | \ + (GPIO_AF6_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_15) +#define RCC_MCO3 RCC_MCO3_PA15 /*!< Alias for compatibility */ +#endif /* RCC_MCO3_SUPPORT */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 1 MCO*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK LL_RCC_MCO1SOURCE_NOCLOCK /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK LL_RCC_MCO1SOURCE_SYSCLK /*!< SYSCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_MSI LL_RCC_MCO1SOURCE_MSI /*!< MSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSI LL_RCC_MCO1SOURCE_HSI /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE LL_RCC_MCO1SOURCE_HSE /*!< HSE after stabilization selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK LL_RCC_MCO1SOURCE_PLLCLK /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI1 LL_RCC_MCO1SOURCE_LSI1 /*!< LSI1 selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI2 LL_RCC_MCO1SOURCE_LSI2 /*!< LSI2 selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE LL_RCC_MCO1SOURCE_LSE /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 LL_RCC_MCO1SOURCE_HSI48 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO1SOURCE_HSE_BEFORE_STAB LL_RCC_MCO1SOURCE_HSE_BEFORE_STAB /*!< HSE before stabilization selection as MCO1 source */ + +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 LL_RCC_MCO1_DIV_1 /*!< MCO not divided */ +#define RCC_MCODIV_2 LL_RCC_MCO1_DIV_2 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 LL_RCC_MCO1_DIV_4 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 LL_RCC_MCO1_DIV_8 /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 LL_RCC_MCO1_DIV_16 /*!< MCO divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_HSEAMPTHRESHOLD HSE bias current factor + * @{ + */ +#define RCC_HSEAMPTHRESHOLD_1_2 LL_RCC_HSEAMPTHRESHOLD_1_2 /*!< HSE bias current factor 1/2 */ +#define RCC_HSEAMPTHRESHOLD_3_4 LL_RCC_HSEAMPTHRESHOLD_3_4 /*!< HSE bias current factor 3/4 */ + +/** + * @} + */ + +/** @defgroup RCC_HSE_CURRENTMAX HSE current max limit + * @{ + */ +#define RCC_HSE_CURRENTMAX_0 LL_RCC_HSE_CURRENTMAX_0 /*!< HSE current max limit 0.18 mA/V */ +#define RCC_HSE_CURRENTMAX_1 LL_RCC_HSE_CURRENTMAX_1 /*!< HSE current max limit 0.57 mA/V */ +#define RCC_HSE_CURRENTMAX_2 LL_RCC_HSE_CURRENTMAX_2 /*!< HSE current max limit 0.78 mA/V */ +#define RCC_HSE_CURRENTMAX_3 LL_RCC_HSE_CURRENTMAX_3 /*!< HSE current max limit 1.13 mA/V */ +#define RCC_HSE_CURRENTMAX_4 LL_RCC_HSE_CURRENTMAX_4 /*!< HSE current max limit 0.61 mA/V */ +#define RCC_HSE_CURRENTMAX_5 LL_RCC_HSE_CURRENTMAX_5 /*!< HSE current max limit 1.65 mA/V */ +#define RCC_HSE_CURRENTMAX_6 LL_RCC_HSE_CURRENTMAX_6 /*!< HSE current max limit 2.12 mA/V */ +#define RCC_HSE_CURRENTMAX_7 LL_RCC_HSE_CURRENTMAX_7 /*!< HSE current max limit 2.84 mA/V */ + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSI1RDY LL_RCC_CIFR_LSI1RDYF /*!< LSI1 Ready Interrupt flag */ +#define RCC_IT_LSI2RDY LL_RCC_CIFR_LSI2RDYF /*!< LSI2 Ready Interrupt flag */ +#define RCC_IT_LSERDY LL_RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_MSIRDY LL_RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#define RCC_IT_HSIRDY LL_RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY LL_RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY LL_RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(SAI1) +#define RCC_IT_PLLSAI1RDY LL_RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif /* SAI1 */ +#define RCC_IT_HSECSS LL_RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS LL_RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY LL_RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * - 100: CRRCR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_MSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_MSIRDY_Pos) /*!< MSI Ready flag */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ +#if defined(SAI1) +#define RCC_FLAG_PLLSAI1RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI1RDY_Pos) /*!< PLLSAI1 Ready flag */ +#endif /* SAI1 */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System failure detection flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSI1RDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSI1RDY_Pos) /*!< LSI1 Ready flag */ +#define RCC_FLAG_LSI2RDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSI2RDY_Pos) /*!< LSI2 Ready flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< Pin reset flag (NRST pin) */ +#define RCC_FLAG_BORRST ((CSR_REG_INDEX << 5U) | RCC_CSR_BORRSTF_Pos) /*!< BOR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +/* Flags in the CRRCR register */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW LL_RCC_LSEDRIVE_LOW /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW LL_RCC_LSEDRIVE_MEDIUMLOW /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH LL_RCC_LSEDRIVE_MEDIUMHIGH /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH LL_RCC_LSEDRIVE_HIGH /*!< LSE high drive capability */ +/** + * @} + */ + +/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock + * @{ + */ +#define RCC_STOP_WAKEUPCLOCK_MSI LL_RCC_STOP_WAKEUPCLOCK_MSI /*!< MSI selection after wake-up from STOP */ +#define RCC_STOP_WAKEUPCLOCK_HSI LL_RCC_STOP_WAKEUPCLOCK_HSI /*!< HSI selection after wake-up from STOP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_CRC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_DMA1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_CRC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ +#define __HAL_RCC_GPIOA_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_HSEM_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_IPCC_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_FLASH_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FLASH) + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_HSEM_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_IPCC_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_FLASH_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_FLASH) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_WWDG_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_WWDG) +#define __HAL_RCC_TIM2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LPTIM1) +#define __HAL_RCC_LPTIM2_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +#define __HAL_RCC_RTCAPB_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_TIM2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_LPTIM2_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA1)) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA2)) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMAMUX1)) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC)) +#if defined(TSC) +#define __HAL_RCC_TSC_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_TSC)) +#endif /* TSC */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOA)) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOB)) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOC)) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOD)) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE)) +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH)) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC)) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1)) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_HSEM_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_IPCC_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_FLASH) + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_QUADSPI)) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_PKA)) +#define __HAL_RCC_AES2_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_AES2)) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_RNG)) +#define __HAL_RCC_HSEM_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_HSEM)) +#define __HAL_RCC_IPCC_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_IPCC)) +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_FLASH)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_WWDG) +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_RTCAPB)) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_WWDG)) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_TIM2)) +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LCD)) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI2)) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1)) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C3)) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_CRS)) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USB)) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPTIM1)) + +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() !(LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM2)) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() !(LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPUART1)) +#endif /* LPUART1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_ADC)) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1)) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SPI1)) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1)) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM16)) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM17)) +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SAI1)) +#endif /* SAI1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2DMA1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_C2SRAM1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_C2CRC_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_C2TSC_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_C2SRAM1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_C2CRC_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_C2TSC_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2GPIOA_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_C2GPIOB_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_C2GPIOC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_C2GPIOH_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_C2GPIOB_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_C2GPIOC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_C2GPIOH_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2PKA_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_C2AES2_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_C2RNG_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_C2HSEM_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_C2IPCC_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_C2FLASH_CLK_ENABLE() LL_C2_AHB3_GRP1_EnableClock(LL_C2_AHB3_GRP1_PERIPH_FLASH) + +#define __HAL_RCC_C2PKA_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_C2AES2_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_C2RNG_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_C2HSEM_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_C2IPCC_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_C2FLASH_CLK_DISABLE() LL_C2_AHB3_GRP1_DisableClock(LL_C2_AHB3_GRP1_PERIPH_FLASH) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2RTCAPB_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_C2TIM2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_C2LCD_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_C2LPTIM2_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +#define __HAL_RCC_C2RTCAPB_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_C2TIM2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_C2LCD_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_C2LPTIM2_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_C2SPI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_C2USART1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_C2TIM16_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_C2TIM17_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_C2SPI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_C2USART1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_C2TIM16_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_C2TIM17_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB3_Clock_Enable_Disable APB3 Peripheral Clock Enable Disable + * @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2BLE_CLK_ENABLE() LL_C2_APB3_GRP1_EnableClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_CLK_ENABLE() LL_C2_APB3_GRP1_EnableClock(LL_C2_APB3_GRP1_PERIPH_802) +#endif /* RCC_802_SUPPORT */ + +#define __HAL_RCC_C2BLE_CLK_DISABLE() LL_C2_APB3_GRP1_DisableClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_CLK_DISABLE() LL_C2_APB3_GRP1_DisableClock(LL_C2_APB3_GRP1_PERIPH_802) +#endif /* RCC_802_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2DMA1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_C2SRAM1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_C2CRC_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_C2TSC_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA1)) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA2)) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)) +#define __HAL_RCC_C2SRAM1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1)) +#define __HAL_RCC_C2CRC_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_CRC)) +#if defined(TSC) +#define __HAL_RCC_C2TSC_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_TSC)) +#endif /* TSC */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2GPIOA_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_C2GPIOB_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_C2GPIOC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_C2GPIOH_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA)) +#define __HAL_RCC_C2GPIOB_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB)) +#define __HAL_RCC_C2GPIOC_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC)) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD)) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE)) +#define __HAL_RCC_C2GPIOH_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC)) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1)) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2PKA_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_C2AES2_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_C2RNG_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_C2HSEM_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_C2IPCC_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_C2FLASH_IS_CLK_ENABLED() LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_FLASH) + +#define __HAL_RCC_C2PKA_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_PKA)) +#define __HAL_RCC_C2AES2_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_AES2)) +#define __HAL_RCC_C2RNG_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_RNG)) +#define __HAL_RCC_C2HSEM_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_HSEM)) +#define __HAL_RCC_C2IPCC_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_IPCC)) +#define __HAL_RCC_C2FLASH_IS_CLK_DISABLED() !(LL_C2_AHB3_GRP1_IsEnabledClock(LL_C2_AHB3_GRP1_PERIPH_FLASH)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2RTCAPB_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_C2TIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_C2LCD_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_C2LPTIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ + +#define __HAL_RCC_C2RTCAPB_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB)) +#define __HAL_RCC_C2TIM2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_TIM2)) +#if defined(LCD) +#define __HAL_RCC_C2LCD_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LCD)) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_SPI2)) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C1)) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C3)) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_CRS)) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_USB)) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)) + +#define __HAL_RCC_C2LPTIM2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2)) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)) +#endif /* LPUART1*/ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_C2SPI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_C2USART1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_C2TIM16_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_C2TIM17_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_ADC)) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1)) +#define __HAL_RCC_C2SPI1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1)) +#define __HAL_RCC_C2USART1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1)) +#define __HAL_RCC_C2TIM16_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM16)) +#define __HAL_RCC_C2TIM17_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM17)) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SAI1)) +#endif /* SAI1 */ + +/** + * @} + */ + + +/** @defgroup RCC_APB3_Clock_Enable_Disable_Status APB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_C2BLE_IS_CLK_ENABLED() LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_IS_CLK_ENABLED() LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_802) +#endif /* RCC_802_SUPPORT */ + +#define __HAL_RCC_C2BLE_IS_CLK_DISABLED() !(LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_BLE)) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_IS_CLK_DISABLED() !(LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_802)) +#endif /* RCC_802_SUPPORT */ + +/** + * @} + */ + + +/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_DMA1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_CRC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + + +#define __HAL_RCC_AHB1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_DMA1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_CRC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ALL) +#define __HAL_RCC_GPIOA_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_AHB2_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ALL) +#define __HAL_RCC_GPIOA_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ALL) +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_HSEM_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_IPCC_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_FLASH_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_FLASH) + +#define __HAL_RCC_AHB3_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ALL) +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_HSEM_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_HSEM) +#define __HAL_RCC_IPCC_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_IPCC) +#define __HAL_RCC_FLASH_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_FLASH) +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB1L_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_TIM2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_APB1H_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_ALL) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPTIM2) + +#define __HAL_RCC_APB1_FORCE_RESET() do { \ + __HAL_RCC_APB1L_FORCE_RESET();\ + __HAL_RCC_APB1H_FORCE_RESET();\ + } while(0U) + +#define __HAL_RCC_APB1L_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_TIM2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#if defined(SPI2) +#define __HAL_RCC_SPI2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1) + +#define __HAL_RCC_APB1H_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_ALL) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPTIM2) + +#define __HAL_RCC_APB1_RELEASE_RESET() do { \ + __HAL_RCC_APB1L_RELEASE_RESET();\ + __HAL_RCC_APB1H_RELEASE_RESET();\ + } while(0U) +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#define __HAL_RCC_APB2_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ +/** + * @} + */ + +/** @defgroup RCC_APB3_Force_Release_Reset APB3 Peripheral Force Release Reset + * @brief Force or release APB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB3_FORCE_RESET() LL_APB3_GRP1_ForceReset(LL_APB3_GRP1_PERIPH_ALL) +#define __HAL_RCC_RF_FORCE_RESET() LL_APB3_GRP1_ForceReset(LL_APB3_GRP1_PERIPH_RF) + +#define __HAL_RCC_APB3_RELEASE_RESET() LL_APB3_GRP1_ReleaseReset(LL_APB3_GRP1_PERIPH_ALL) +#define __HAL_RCC_RF_RELEASE_RESET() LL_APB3_GRP1_ReleaseReset(LL_APB3_GRP1_PERIPH_RF) + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_C2SRAM1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_C2CRC_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_C2TSC_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) +#define __HAL_RCC_C2SRAM1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_SRAM1) + +#define __HAL_RCC_C2CRC_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_CRC) +#if defined(TSC) +#define __HAL_RCC_C2TSC_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_TSC) +#endif /* TSC */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_C2GPIOB_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_C2GPIOC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_C2GPIOH_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_C2GPIOB_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_C2GPIOC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) +#define __HAL_RCC_C2GPIOH_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2) +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_FLASH) + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_AES2_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2) +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_FLASH) + +#define __HAL_RCC_C2PKA_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_C2AES2_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_C2RNG_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_C2SRAM2_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM2) +#define __HAL_RCC_C2FLASH_CLK_SLEEP_ENABLE() LL_C2_AHB3_GRP1_EnableClockSleep(LL_C2_AHB3_GRP1_PERIPH_FLASH) + +#define __HAL_RCC_C2PKA_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_PKA) +#define __HAL_RCC_C2AES2_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_AES2) +#define __HAL_RCC_C2RNG_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_RNG) +#define __HAL_RCC_C2SRAM2_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_SRAM2) +#define __HAL_RCC_C2FLASH_CLK_SLEEP_DISABLE() LL_C2_AHB3_GRP1_DisableClockSleep(LL_C2_AHB3_GRP1_PERIPH_FLASH) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_WWDG) +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_WWDG) +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2) + +#define __HAL_RCC_C2TIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_C2LCD_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#define __HAL_RCC_C2RTCAPB_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_C2LPTIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2) + +#define __HAL_RCC_C2TIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) +#define __HAL_RCC_C2LCD_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif /* LCD */ +#define __HAL_RCC_C2RTCAPB_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_USB) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /* LPUART1 */ +#define __HAL_RCC_C2LPTIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_C2SPI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_C2USART1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_C2TIM16_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_C2TIM17_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) +#define __HAL_RCC_C2SPI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) +#define __HAL_RCC_C2USART1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) +#define __HAL_RCC_C2TIM16_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16) +#define __HAL_RCC_C2TIM17_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /* SAI1 */ +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) != RESET) +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) != RESET) +#if defined(TSC) +#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != RESET) +#endif /* TSC */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) == RESET) +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) == RESET) +#if defined(TSC) +#define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) == RESET) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA1SMEN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA2SMEN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMAMUX1SMEN) != RESET) +#define __HAL_RCC_C2SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_SRAM1SMEN) != RESET) +#define __HAL_RCC_C2CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_CRCSMEN) != RESET) +#if defined(TSC) +#define __HAL_RCC_C2TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_TSCSMEN) != RESET) +#endif /* TSC */ + +#define __HAL_RCC_C2DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA1SMEN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_C2DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA2SMEN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_C2DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMAMUX1SMEN) == RESET) +#define __HAL_RCC_C2SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_SRAM1SMEN) == RESET) +#define __HAL_RCC_C2CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_CRCSMEN) == RESET) +#if defined(TSC) +#define __HAL_RCC_C2TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_TSCSMEN) == RESET) +#endif /* TSC */ +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != RESET) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != RESET) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != RESET) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != RESET) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != RESET) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) != RESET) +#endif /* AES1 */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == RESET) +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == RESET) +#endif /* GPIOD */ +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == RESET) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == RESET) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == RESET) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) == RESET) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOASMEN) != RESET) +#define __HAL_RCC_C2GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOBSMEN) != RESET) +#define __HAL_RCC_C2GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOCSMEN) != RESET) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIODSMEN) != RESET) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) != RESET) +#define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) != RESET) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) != RESET) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) != RESET) +#endif /* AES1 */ + +#define __HAL_RCC_C2GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_C2GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_C2GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOCSMEN) == RESET) +#if defined(GPIOD) +#define __HAL_RCC_C2GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIODSMEN) == RESET) +#endif /* GPIOD */ +#define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) == RESET) +#define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) == RESET) +#if defined(ADC_SUPPORT_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) == RESET) +#endif /* ADC_SUPPORT_5_MSPS */ +#if defined(AES1) +#define __HAL_RCC_C2AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) == RESET) +#endif /* AES1 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QUADSPISMEN) != RESET) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_PKASMEN) != RESET) +#define __HAL_RCC_AES2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_AES2SMEN) != RESET) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_RNGSMEN) != RESET) +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_SRAM2SMEN) != RESET) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FLASHSMEN) != RESET) + +#if defined(QUADSPI) +#define __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QUADSPISMEN) == RESET) +#endif /* QUADSPI */ +#define __HAL_RCC_PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_PKASMEN) == RESET) +#define __HAL_RCC_AES2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_AES2SMEN) == RESET) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_RNGSMEN) == RESET) +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_SRAM2SMEN) == RESET) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FLASHSMEN) == RESET) + +#define __HAL_RCC_C2PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_PKASMEN) != RESET) +#define __HAL_RCC_C2AES2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_AES2SMEN) != RESET) +#define __HAL_RCC_C2RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_RNGSMEN) != RESET) +#define __HAL_RCC_C2SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_SRAM2SMEN) != RESET) +#define __HAL_RCC_C2FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_FLASHSMEN) != RESET) + +#define __HAL_RCC_C2PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_PKASMEN) == RESET) +#define __HAL_RCC_C2AES2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_AES2SMEN) == RESET) +#define __HAL_RCC_C2RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_RNGSMEN) == RESET) +#define __HAL_RCC_C2SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_SRAM2SMEN) == RESET) +#define __HAL_RCC_C2FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB3SMENR, RCC_C2AHB3SMENR_FLASHSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != RESET) +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != RESET) +#endif /* LCD */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != RESET) +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != RESET) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != RESET) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != RESET) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBSMEN) != RESET) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) != RESET) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) != RESET) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == RESET) +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == RESET) +#endif /* LCD */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == RESET) +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == RESET) +#endif /* SPI2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == RESET) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == RESET) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBSMEN) == RESET) +#endif /* USB */ +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) == RESET) +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) == RESET) +#endif /* LPUART1 */ +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) == RESET) + +#define __HAL_RCC_C2TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_TIM2SMEN) != RESET) +#if defined(LCD) +#define __HAL_RCC_C2LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LCDSMEN) != RESET) +#endif /* LCD */ +#define __HAL_RCC_C2RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_RTCAPBSMEN) \ + != RESET) +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_SPI2SMEN) != RESET) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C1SMEN) != RESET) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C3SMEN) != RESET) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_CRSSMEN) != RESET) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_USBSMEN) != RESET) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LPTIM1SMEN) \ + != RESET) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPUART1SMEN) \ + != RESET) +#endif /* LPUART1 */ +#define __HAL_RCC_C2LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPTIM2SMEN) \ + != RESET) + +#define __HAL_RCC_C2TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_TIM2SMEN) == RESET) +#if defined(LCD) +#define __HAL_RCC_C2LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LCDSMEN) == RESET) +#endif /* LCD */ +#define __HAL_RCC_C2RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_RTCAPBSMEN) \ + == RESET) +#if defined(SPI2) +#define __HAL_RCC_C2SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_SPI2SMEN) == RESET) +#endif /* SPI2 */ +#define __HAL_RCC_C2I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C1SMEN) == RESET) +#if defined(I2C3) +#define __HAL_RCC_C2I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C3SMEN) == RESET) +#endif /* I2C3 */ +#if defined(CRS) +#define __HAL_RCC_C2CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_CRSSMEN) == RESET) +#endif /* CRS */ +#if defined(USB) +#define __HAL_RCC_C2USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_USBSMEN) == RESET) +#endif /* USB */ +#define __HAL_RCC_C2LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LPTIM1SMEN) \ + == RESET) +#if defined(LPUART1) +#define __HAL_RCC_C2LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPUART1SMEN) \ + == RESET) +#endif /* LPUART1 */ +#define __HAL_RCC_C2LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPTIM2SMEN) \ + == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_ADCSMEN) != RESET) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != RESET) +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != RESET) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_ADCSMEN) == RESET) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == RESET) +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == RESET) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_ADCSMEN) != RESET) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) != RESET) +#define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) != RESET) +#define __HAL_RCC_C2USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) \ + != RESET) +#define __HAL_RCC_C2TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM16SMEN) != RESET) +#define __HAL_RCC_C2TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM17SMEN) != RESET) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SAI1SMEN) != RESET) +#endif /* SAI1 */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_ADCSMEN) == RESET) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) == RESET) +#define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) == RESET) +#define __HAL_RCC_C2USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) \ + == RESET) +#define __HAL_RCC_C2TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM16SMEN) == RESET) +#define __HAL_RCC_C2TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM17SMEN) == RESET) +#if defined(SAI1) +#define __HAL_RCC_C2SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SAI1SMEN) == RESET) +#endif /* SAI1 */ + +/** + * @} + */ + +/** @defgroup RCC_C2APB3_Clock_Sleep_Enable_Disable APB3 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_C2BLE_CLK_SLEEP_ENABLE() LL_C2_APB3_GRP1_EnableClockSleep(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_CLK_SLEEP_ENABLE() LL_C2_APB3_GRP1_EnableClockSleep(LL_C2_APB3_GRP1_PERIPH_802) +#endif /* RCC_802_SUPPORT */ + +#define __HAL_RCC_C2BLE_CLK_SLEEP_DISABLE() LL_C2_APB3_GRP1_DisableClockSleep(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_CLK_SLEEP_DISABLE() LL_C2_APB3_GRP1_DisableClockSleep(LL_C2_APB3_GRP1_PERIPH_802) +#endif /* RCC_802_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_C2APB3_Clock_Sleep_Enable_Disable_Status APB3 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB3 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_C2BLE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_BLESMEN) != RESET) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_802SMEN) != RESET) +#endif /* RCC_802_SUPPORT */ + +#define __HAL_RCC_C2BLE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_BLESMEN) == RESET) +#if defined(RCC_802_SUPPORT) +#define __HAL_RCC_C2802_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_802SMEN) == RESET) +#endif /* RCC_802_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() LL_RCC_ForceBackupDomainReset() +#define __HAL_RCC_BACKUPRESET_RELEASE() LL_RCC_ReleaseBackupDomainReset() + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() LL_RCC_EnableRTC() +#define __HAL_RCC_RTC_DISABLE() LL_RCC_DisableRTC() + +/** + * @} + */ + +/** @brief Macros to enable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP, STANDBY or SHUTDOWN modes. + * It is enabled by hardware to force the HSI oscillator ON when STOPWUCK=1 + * or HSIASFS = 1 when leaving Stop modes, or in case of failure of the HSE + * crystal oscillator and Security System CSS is enabled. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() LL_RCC_HSI_Enable() + +/** @brief Macro to disable the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_DISABLE() LL_RCC_HSI_Disable() + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between Min_data=0 and Max_Data=127. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + LL_RCC_HSI_SetCalibTrimming(__HSICALIBRATIONVALUE__) + +/** + * @brief Macros to enable or disable the wakeup the Internal High Speed oscillator (HSI) + * in parallel to the Internal Multi Speed oscillator (MSI) used at system wakeup. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSIAUTOMATIC_START_ENABLE() LL_RCC_HSI_EnableAutoFromStop() +#define __HAL_RCC_HSIAUTOMATIC_START_DISABLE() LL_RCC_HSI_DisableAutoFromStop() + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() LL_RCC_HSI_EnableInStopMode() +#define __HAL_RCC_HSISTOP_DISABLE() LL_RCC_HSI_DisableInStopMode() + +/** + * @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI). + * @note The MSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * startup from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note MSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the MSI. + * @note After enabling the MSI, the application software should wait on + * MSIRDY flag to be set indicating that MSI clock is stable and can + * be used as system clock source. + * @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_MSI_ENABLE() LL_RCC_MSI_Enable() +#define __HAL_RCC_MSI_DISABLE() LL_RCC_MSI_Disable() + +/** @brief Macro to adjust the Internal Multi Speed oscillator (MSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal MSI RC. + * Refer to the Application Note AN3300 for more details on how to + * calibrate the MSI. + * @param __MSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is @ref RCC_MSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 255. + * @retval None + */ +#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(__MSICALIBRATIONVALUE__) \ + LL_RCC_MSI_SetCalibTrimming(__MSICALIBRATIONVALUE__) + +/** + * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range in run mode + * @note After restart from Reset , the MSI clock is around 4 MHz. + * After stop the startup clock can be MSI (at any of its possible + * frequencies, the one that was used before entering stop mode) or HSI. + * After Standby its frequency can be selected between 4 possible values + * (1, 2, 4 or 8 MHz). + * @note MSIRANGE can be modified when MSI is OFF (MSION=0) or when MSI is ready + * (MSIRDY=1). + * @note The MSI clock range after reset can be modified on the fly. + * @param __MSIRANGEVALUE__ specifies the MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + * @retval None + */ +#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) LL_RCC_MSI_SetRange(__MSIRANGEVALUE__) + + +/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode + * @retval MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + */ +#define __HAL_RCC_GET_MSI_RANGE() LL_RCC_MSI_GetRange() + + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI1). + * @note After enabling the LSI1, the application software should wait on + * LSI1RDY flag to be set indicating that LSI1 clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @retval None + */ +#define __HAL_RCC_LSI1_ENABLE() LL_RCC_LSI1_Enable() +#define __HAL_RCC_LSI1_DISABLE() LL_RCC_LSI1_Disable() + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI2). + * @note After enabling the LSI2, the application software should wait on + * LSI2RDY flag to be set indicating that LSI2 clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @retval None + */ +#define __HAL_RCC_LSI2_ENABLE() LL_RCC_LSI2_Enable() +#define __HAL_RCC_LSI2_DISABLE() LL_RCC_LSI2_Disable() + +/** @brief Macro to adjust the Internal Low Speed oscillator (LSI2) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __LSI2TRIMMINGVALUE__ specifies the calibration trimming value + * This parameter must be a number between Min_data=0 and Max_Data=15. + * @retval None + */ +#define __HAL_RCC_LSI2_CALIBRATIONVALUE_ADJUST(__LSI2TRIMMINGVALUE__) LL_RCC_LSI2_SetTrimming(__LSI2TRIMMINGVALUE__) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note After enabling the HSE (RCC_HSE_ON), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @note (*) Value not defined for all devices + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + LL_RCC_HSE_Enable(); \ + } \ + else \ + { \ + LL_RCC_HSE_Disable(); \ + } \ + } while(0U) + +/** @brief Macros to enable or disable the HSE Prescaler + * @note HSE div2 could be used as Sysclk or PLL entry in Range2 + * @retval None + */ +#define __HAL_RCC_HSE_DIV2_ENABLE() LL_RCC_HSE_EnableDiv2() +#define __HAL_RCC_HSE_DIV2_DISABLE() LL_RCC_HSE_DisableDiv2() + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + LL_RCC_LSE_Enable(); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + LL_RCC_LSE_EnableBypass(); \ + LL_RCC_LSE_Enable(); \ + } \ + else \ + { \ + LL_RCC_LSE_Disable(); \ + LL_RCC_LSE_DisableBypass(); \ + } \ + } while(0U) + + +#if defined(RCC_HSI48_SUPPORT) +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() LL_RCC_HSI48_Enable() +#define __HAL_RCC_HSI48_DISABLE() LL_RCC_HSI48_Disable() +#endif + +/** @brief Macros to configure HSE sense amplifier threshold. + * @note to configure HSE sense amplifier, first disable HSE + * using @ref __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_AMPTHRES__ specifies the HSE sense amplifier threshold. + * This parameter can be one of the following values: + * @arg @ref RCC_HSEAMPTHRESHOLD_1_2 HSE bias current factor 1/2. + * @arg @ref RCC_HSEAMPTHRESHOLD_3_4 HSE bias current factor 3/4. + * @retval None + */ +#define __HAL_RCC_HSE_AMPCONFIG(__HSE_AMPTHRES__) LL_RCC_HSE_SetSenseAmplifier(__HSE_AMPTHRES__) + +/** @brief Macros to configure HSE current control. + * @note to configure HSE current control, first disable HSE + * using @ref __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_CURRENTMAX__ specifies the HSE current max limit. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_CURRENTMAX_0 HSE current max limit 0.18 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_1 HSE current max limit 0.57 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_2 HSE current max limit 0.78 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_3 HSE current max limit 1.13 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_4 HSE current max limit 0.61 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_5 HSE current max limit 1.65 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_6 HSE current max limit 2.12 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_7 HSE current max limit 2.84 mA/V. + * @retval None + */ +#define __HAL_RCC_HSE_CURRENTCONFIG(__HSE_CURRENTMAX__) LL_RCC_HSE_SetCurrentControl(__HSE_CURRENTMAX__) + +/** @brief Macros to configure HSE capacitor tuning. + * @note to configure HSE current control, first disable HSE + * using __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_LOAD_CAPACITANCE__ specifies the HSE capacitor value. + * This Value Between Min_Data = 0 and Max_Data = 63 + * @retval None + */ +#define __HAL_RCC_HSE_CAPACITORTUNING(__HSE_LOAD_CAPACITANCE__) LL_RCC_HSE_SetCapacitorTuning(__HSE_LOAD_CAPACITANCE__) + + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE none clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) LL_RCC_SetRTCClockSource(__RTC_CLKSOURCE__) + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE none clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() LL_RCC_GetRTCClockSource() + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ +#define __HAL_RCC_PLL_ENABLE() LL_RCC_PLL_Enable() +#define __HAL_RCC_PLL_DISABLE() LL_RCC_PLL_Disable() + +/** @brief Macro to configure the PLL clock source. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This function must be used only when the main PLL is disabled. + * @note This clock source is common for the main PLL and audio PLL (PLL and PLLSAI1). + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL multiplication factor. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a value of @ref RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This clock source is common for the main PLL and audio PLL (PLL and PLLSAI1). + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a value of @ref RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 2.66 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 6 and 127. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 96 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for ADC and SAI1 clock. + * This parameter must be a value of @ref RCC_PLLP_Clock_Divider. + * + * @param __PLLQ__ specifies the division factor for USB and RNG clocks. + * This parameter must be a value of @ref RCC_PLLQ_Clock_Divider + * @note If the USB FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @param __PLLR__ specifies the division factor for the main system clock. + * This parameter must be a value of @ref RCC_PLLR_Clock_Divider + * @note You have to set the PLLR parameter correctly to not exceed 48 MHZ. + * @retval None + */ +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG( RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | \ + RCC_PLLCFGR_PLLM | \ + RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | \ + RCC_PLLCFGR_PLLQ | \ + RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLQ__) | \ + (uint32_t) (__PLLR__))) + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() LL_RCC_PLL_GetMainSource() + +/** + * @brief Enable or disable each clock output (RCC_PLL_SYSCLK, RCC_PLL_USBCLK, RCC_PLL_SAI1CLK) + * @note Enabling/disabling clock outputs RCC_PLL_SAI1CLK and RCC_PLL_USBCLK can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLL_SYSCLK cannot + * be stopped if used as System Clock. + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLL_SAI1CLK This clock is used to generate the clock for SAI + * @arg @ref RCC_PLL_ADCCLK This clock is used to generate the clock for ADC + * @arg @ref RCC_PLL_USBCLK This Clock is used to generate the clock for the USB FS (48 MHz) + * @arg @ref RCC_PLL_RNGCLK This clock is used to generate the clock for RNG + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_USBCLK, RCC_PLL_SAI1CLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_SAI1CLK This clock is used to generate an accurate clock to achieve high-quality + * audio performance on SAI interface + * @arg @ref RCC_PLL_ADCCLK same + * @arg @ref RCC_PLL_USBCLK This Clock is used to generate the clock for the USB FS (48 MHz) + * @arg @ref RCC_PLL_RNGCLK same + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_MSI MSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) LL_RCC_SetSysClkSource(__SYSCLKSOURCE__) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_MSI MSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() LL_RCC_GetSysClkSource() + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) LL_RCC_LSE_SetDriveCapability(__LSEDRIVE__) + +/** + * @brief Macro to configure the wake up from stop clock. + * @param __STOPWUCLK__ specifies the clock source used after wake up from stop. + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) LL_RCC_SetClkAfterWakeFromStop(__STOPWUCLK__) + + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI1 LSI1 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI2 LSI2 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source (*) + * + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * + * @note (*) Value not defined for all devices + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) LL_RCC_ConfigMCO((__MCOCLKSOURCE__), (__MCODIV__)) + + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSI1RDY LSI1 ready interrupt enable + * @arg @ref RCC_IT_LSERDY LSE ready interrupt enable + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt enable + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt enable + * @arg @ref RCC_IT_HSERDY HSE ready interrupt enable + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt enable + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt enable (*) + * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt enable + * + * @note (*) Value not defined for all devices + * + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSI1RDY LSI1 ready interrupt enable + * @arg @ref RCC_IT_LSERDY LSE ready interrupt enable + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt enable + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt enable + * @arg @ref RCC_IT_HSERDY HSE ready interrupt enable + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt enable + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt enable (*) + * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt enable + * + * @note (*) Value not defined for all devices + * + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits (Perform Byte access to RCC_CICR[17:0] + * bits to clear the selected interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSI1RDY LSI1 ready interrupt clear + * @arg @ref RCC_IT_LSERDY LSE ready interrupt clear + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt clear + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt clear + * @arg @ref RCC_IT_HSERDY HSE ready interrupt clear + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt clear + * @arg @ref RCC_IT_PLLRDY PLLSAI1 ready interrupt clear + * @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt clear + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt clear + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt clear (*) + * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt clear + * + * @note (*) Value not defined for all devices + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSI1RDY LSI1 ready interrupt flag + * @arg @ref RCC_IT_LSERDY LSE ready interrupt flag + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt flag + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt flag + * @arg @ref RCC_IT_HSERDY HSE ready interrupt flag + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt flag + * @arg @ref RCC_IT_PLLRDY PLLSAI1 ready interrupt flag + * @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt flag + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt flag + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt flag (*) + * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt flag + * + * @note (*) Value not defined for all devices + * + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_BORRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() LL_RCC_ClearResetFlags() + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_PLLRDY PLLSAI1 clock ready + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 (*) + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSI1RDY LSI1 oscillator clock ready + * @arg @ref RCC_FLAG_LSI2RDY LSI2 oscillator clock ready + * @arg @ref RCC_FLAG_BORRST BOR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * + * @note (*) Value not defined for all devices + * + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) \ + ? 1U : 0U) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32wbxx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); + +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetHCLK2Freq(void); +uint32_t HAL_RCC_GetHCLK4Freq(void); + +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); + +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* LSE & HSE CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +uint32_t HAL_RCC_GetResetSource(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WBxx_HAL_RCC_H */ |